Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

GS-5220-8P2T2S

GS-5220-8P2T2S – NEW!

L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch

  • Overview
  • A Perfect Managed PoE+ Switch with Full PoE+ Power Budget
    PLANET GS-5220-8P2T2S is a Layer 2+ Managed Gigabit Switch, which supports both IPv4 and IPv6 protocols and Layer 3 static routing capability, and provides 8 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+, 2 additional Gigabit copper ports and another 2 extra 100/1000BASE-X SFP fiber slots. Each of the eight Gigabit ports provides 30 watts of power, which means a total power budget of up to 240 watts can be utilized simultaneously without considering the different types of PoE applications being employed. It provides a quick, safe and cost-effective Power over Ethernet network solution to IP security surveillance for small businesses and enterprises.
    Centralized Power Management for Gigabit Ethernet PoE Networking
    To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the GS-5220-8P2T2S features high-performance Gigabit IEEE 802.3af PoE (up to 15.4 watts) and IEEE 802.3at PoE+ (up to 30 watts) on all ports. It perfectly meets the power requirement of PoE VoIP phone and all kinds of PoE IP cameras such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater for high power consumption.

    The GS-5220-8P2T2S’s PoE capabilities also help to reduce deployment costs for network devices as a result of freeing from restrictions of power outlet locations. Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time.

    Built-in Unique PoE Functions for Surveillance Management
    As a managed PoE Switch for surveillance network, the GS-5220-8P2T2S features intelligent PoE management functions:
    PD Alive Check
    Scheduled Power Recycling
    SMTP/SNMP Trap Event Alert
    PoE Schedule

    Intelligent Powered Device Alive Check
    The GS-5220-8P2T2S can be configured to monitor a connected PD (Powered Device) status in real time via ping action. Once the PD stops working and it is without response, the GS-5220-8P2T2S will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source, thus reducing administrator management burden.
    Scheduled Power Recycling
    The GS-5220-8P2T2S allows each of the connected PDs to reboot at a specified time each week. Therefore, it will reduce the chance of PD crash resulting from buffer overflow.
    SMTP/SNMP Trap Event Alert
    Though most NVR or camera management software offers SMTP email alert function, the GS-5220-8P2T2S further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process.
    PoE Schedule for Energy Saving
    Besides being used for IP surveillance, the GS-5220-8P2T2S is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the GS-5220-8P2T2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget.
    Solution for IPv6 Networking
    With the support for IPv6/IPv4 protocol, and easy and friendly management interfaces, the GS-5220-8P2T2S is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network.
    IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the GS-5220-8P2T2S not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application.

    Robust Layer2 Features
    The GS-5220-8P2T2S can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The GS-5220-8P2T2S allows the operation of a high-speed trunk combining multiple ports. Supporting 6 trunk groups, it enables a maximum of up to 8 ports per trunk and supports connection fail-over as well.

    Powerful Security
    The SGS-5220-8P2T2S offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.

    Enhanced Security and Traffic Control
    The GS-5220-8P2T2S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now build highly-secure corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the GS-5220-8P2T2S is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, theGS-5220-8P2T2S offers an easy-to-use, platform independent management and configuration facility. The GS-5220-8P2T2S supports SNMP and it can be managed via any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the GS-5220-8P2T2S offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the GS-5220-8P2T2S offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session.

    Flexible and Extendable Solution
    The 2 mini-GBIC SFP slots built in the GS-5220-8P2T2S support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The GS-5220-8P2T2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

  • Applications
  • Layer 2+ VLAN Static Routing and PoE Application
    With the built-in robust IPv4/IPv6 Layer 3 traffic routing protocols, the GS-5220-8P2T2S ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The GS-5220-8P2T2S is certainly a cost-effective and ideal solution for enterprises.

    Providing up to 8 Gigabit High-power PoE ports and in-line power interface, the GS-5220-8P2T2S High-power PoE Switch can easily build a centrally-controlled power network shared by wireless Gigabit AP, IP phone system, or mega-pixel IP camera system group for the enterprises.

    PoE Wi-Fi Hotspot Solution with Extended Network Infrastructure for Public Spaces
    The GS-5220-8P2T2S comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost. Providing eight 10/100/1000BASE-T PoE ports, two 10/100/1000BASE-T copper ports, in-line power interfaces and two Gigabit SFP interfaces, the GS-5220-8P2T2S can easily build a Networking Authentication on Wireless LAN Controllers system for the enterprises. For instance, it can work with the Wireless Controller and RADIUS Server to perform comprehensive security for wireless user authentication with powered APs.
  • Key Features
  • Physical Port

    • 10-Port 10/100/1000BASE-T RJ45 copper with 8-Port IEEE 802.3at/af Power over Ethernet Injector function
    • 2 100/1000BASE-X mini-GBIC/SFP slots
    • RJ45 console interface for basic management and setup

    Power over Ethernet

      • Complies with IEEE 802.3at High Power over Ethernet end-span PSE
      • Complies with IEEE 802.3af Power over Ethernet end-span PSE
      • Up to 8 ports of IEEE 802.3af/802.3at devices powered
      • Supports PoE Power up to 30.8 watts for each PoE port
      • Auto detects powered device (PD)
      • Circuit protection prevents power interference between ports
      • Remote power feeding up to 100 meters
      • PoE Management

    – Total PoE power budget control- Per port PoE function enable/disable- PoE Port Power feeding priority- Per PoE port power limitation- PD classification detection- PD alive check- PoE schedule- PD power recycling schedule
    Layer 2 Features

      • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
      • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
      • Storm Control support

    – Broadcast / Multicast / Unknown unicast

      • Supports VLAN

    – IEEE 802.1Q tagged VLAN- Up to 255 VLANs groups, out of 4094 VLAN IDs- Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)- Private VLAN Edge (PVE)- Protocol-based VLAN- MAC-based VLAN- Voice VLAN

      • Supports Spanning Tree Protocol

    – STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard

      • Supports Link Aggregation

    – 802.3ad Link Aggregation Control Protocol (LACP)- Cisco ether-channel (static trunk)- Maximum 6 trunk groups, up to 8 ports per trunk group- Up to 16Gbps bandwidth (full duplex mode)

    • Provides port mirror (many-to-1)
    • Port mirroring to monitor the incoming or outgoing traffic on a particular port
    • Loop protection to avoid broadcast loops

    Layer 3 IP Routing Features

    • Supports maximum 32 static routes and route summarization

    Quality of Service

      • Ingress Shaper and Egress Rate Limit per port bandwidth control
      • 8 priority queues on all switch ports
      • Traffic classification

    – IEEE 802.1p CoS- TOS/DSCP/IP Precedence of IPv4/IPv6 packets- IP TCP/UDP port number- Typical network application

    • Strict priority and Weighted Round Robin (WRR) CoS policies
    • Supports QoS and In/Out bandwidth control on each port
    • Traffic-policing policies on the switch port
    • DSCP remarking

    Multicast

    • Supports IGMP Snooping v1, v2 and v3
    • Supports MLD Snooping v1 and v2
    • Querier mode support
    • IGMP Snooping port filtering
    • MLD Snooping port filtering
    • Multicast VLAN Registration (MVR) support

    Security

      • Authentication

    – IEEE 802.1x Port-based/MAC-based network access authentication- Built-in RADIUS client to co-operate with the RADIUS servers- TACACS+ login users access authentication- RADIUS/TACACS+ users access authentication

      • Access Control List

    – IP-based Access Control List (ACL)- MAC-based Access Control List

    • Source MAC/IP address binding
    • DHCP Snooping to filter un-trusted DHCP messages
    • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
    • IP Source Guard prevents IP spoofing attacks
    • Auto DoS rule to defend DoS attack
    • IP address access management to prevent unauthorized intruder

    Management

      • IPv4 and IPv6 dual stack management
      • Switch Management Interfaces

    – Console/Telnet Command Line Interface- Web switch management- SNMP v1, v2c, and v3 switch management- SSH/SSL secure access

      • IPv6 IP Address/NTP/DNS management
      • Built-in Trivial File Transfer Protocol (TFTP) client
      • BOOTP and DHCP for IP address assignment
      • System Maintenance

    – Firmware upload/download via HTTP/TFTP- Reset button for system reboot or reset to factory default- Dual Images

      • DHCP Relay
      • DHCP Option82
      • User Privilege levels control
      • NTP (Network Time Protocol)
      • Link Layer Discovery Protocol (LLDP) and LLDP-MED
      • Network Diagnostic

    – ICMPv6/ICMPv4 Remote Ping- Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues

    • SMTP/Syslog remote alarm
    • Four RMON groups (history, statistics, alarms and events)
    • SNMP trap for interface Linkup and Linkdown notification
    • System Log
    • PLANET Smart Discovery Utility for deployment management
  • Specification
  • Hardware Specifications
    Copper Ports 10 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 x 100/1000BASE-X SFP interfaces with Port-11 to Port-12
    Supports 100/1000Mbps dual mode and DDM
    PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8
    Console 1 x RJ45 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 24Gbps / non-blocking
    Throughput 17.76Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and aging
    Shared Data Buffer 1392KB
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9KB
    Reset Button < 5 sec: System reboot > 5 sec: Factory default
    LED System:
    Fan Alert (Green), SYS (Green), PWR (Green)
    10/100/1000T RJ45 Interfaces (Port 1 to Port 8):
    10/100/1000Mbps LNK/ACT (Green)
    PoE-in-Use (Orange)
    10/100/1000T RJ45 Interfaces (Port 9 to Port 10):
    LNK/ACT (Green)
    1000Mbps (Orange)
    100/1000Mbps SFP Combo Interfaces (Port 11 to Port 12):
    LNK/ACT (Green)
    1000Mbps (Orange)
    Power Requirements 100~240V AC, 50/60Hz
    Power Consumption (Full Loading) 320 watts/1091.9 BTU (max.)
    ESD Protection 6KV DC
    Dimensions (W x D x H) 330 x 200 x 43.5 mm, 1U height
    Weight 2kg
    Power over Ethernet
    PoE Standard IEEE 802.3af/802.3at PoE/PSE
    PoE Power Supply Type End-span
    PoE Power Output Per port 54V DC, max. 30.8 watts
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 240 watts (max.) @ 25 degrees C
    200 watts (max.) @ 50 degrees C
    PoE Ability PD @ 7 watts: 8 units
    PD @ 15.4 watts: 8 units
    PD @ 30.8 watts: 8 units
    Layer2 Management Functions
    Basic Management Interfaces Console, Telnet, Web browser, SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow Control disable/enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
    Port Mirroring TX/RX/Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP/Static Trunk
    Supports 6 trunk groups with 8 ports per trunk
    QoS Traffic classification based, strict priority and WRR
    8-level priority for switching
    – Port number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP packet
    IGMP Snooping IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast groups
    MLD Querier mode support
    Access Control List IP-based ACL/MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    SNMP MIBs RFC 1213 MIB-II
    RFC 2863 IF-MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    RFC 2863 Interface MIB
    RFC 2665 Ether-Like MIB
    RFC 2737 Entity MIB
    RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
    RFC 2618 RADIUS Client MIB
    RFC 3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    Power over Ethernet MIB
    Layer 3 Functions
    IP Interfaces Max. 8 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 software static routing
    IPv6 software static routing
    Standards Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z 1000BASE-SX/LX
    IEEE 802.3ab 1000BASE-T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP v1
    RFC 2236 IGMP v2
    RFC 3376 IGMP v3
    RFC 2710 MLD v1
    FRC 3810 MLD v2
    Environments
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
  • Downloads
  • Quick Guide

    Date Version Description Download
    2015-08-07 1.2 Initial release.
     
    Ordering Information
    GS-5220-8P2T2S L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch