DrayTek has recently released new firmware for several models of routers as well as an updated version of Smart Monitor.  The new firmware introduces new features as well as a number of bug fixes. New firmware is available for the following routers:

  • Vigor2925 series : f/w 3.7.4
  • Vigor300B & Vigor3900 : f/w 1.0.8
  • VigorAP 900: f/w 1.1.2

Smart Monitor has been updated to version 2.4.4
Firmware Details
Vigor2925 Series: Firmware version 3.7.4
New Features

  • Add URL link for dashboard panel.
  • Add station list and traffic graph for APM.
  • VoIP function for Vigor2925Vn
  • CVM (Central VPN Management) function.
  •  Dual 3G/LTE function.
  • Two USB modem status.
  • IPv6 for SSH.
  • AP load balance.
  • AP Maintenance.
  •  Rogue AP detection.

 
Vigor3900 : Firmware version  1.0.8
New Features

  • Same WAN VLAN ID can be used in different WAN interfaces. (WAN >> General
  • Setup Mode: Advance, Switch Mode: Double Tag)
  • QoS for multiple WANs.
  • Support SNMP v3.
  • Support country block for Firewall.
  • Support WCF white list.
  • LAN DNS server.
  • BGP routing protocol.
  • SSL VPN tunnel mode (up to 20 tunnels).
  • Web Portal and Hotspot (Guest profile) in User Management.
  • PPTP acceleration for PPTP WAN/Remote Dial-in/LAN to LAN (125Mbps with
  • MPPE, greater than 900Mbps without MPPE).
  • QoS retag option.
  • VPN dial-out failover if WAN disconnected.
  • VPN LAN to LAN for overlap/duplicate subnets.
  • Display the last UP/DOWN log of VPN profile.
  • Add default policy for Firewall and default block policy can be applied.
  •  Add IPv6 firewall settings.
  • Add DNS object.
  • Add a remote capture telnet command (rc), for traffic monitor and wireshark remote capture.
  • Add front panel and VPN status on the dashboard

Vigor300B: Firmware version  1.0.8
New Features

  • Same WAN VLAN ID can be used in different WAN interfaces. (WAN >> General
  • Setup Mode: Advance, Switch Mode: Double Tag
  • QoS for multiple WANs.
  • SNMP v3.
  • Country block for Firewall.
  • WCF white list.
  • LAN DNS server.
  • BGP routing protocol.
  • Web Portal and Hotspot (Guest profile) in User Management.
  • QoS retag option.
  • Add default policy for Firewall and default block policy can be applied.
  • Add IPv6 firewall settings.
  •  Add DNS object.
  •  Add a remote capture telnet command (rc), for traffic monitor and wireshark remote capture.

 
VigorAP 900: Firmware Version 1.1.2
New Features

  • Support LED ON/OFF action for schedule function.
  •  5G wireless IGMP snooping function is enabled in default.
  •  WPS button can be used to disable APM function.
  •  Adjust station list display parameters.

Smart Monitor: version 2.4.4
New Features

  • Support Group report.

Improvement

  • Improved: Optimize data reading speed.

 
The new firmware as well as the latest version of Smart Monitor can be downloaded from:
http://www.draytek.com/index.php?option=com_jumi&view=application&fileid=15&Itemid=583&lang=en