DINTEK Electronic Ltd was founded in 1990 and is now a leading manufacturer of LAN cabling systems and tools. Headquartered in Taiwan with a subsidiary in Switzerland, DINTEK is well established in both the Asian and European markets and is now ACMA certified for Australian cabling installations.
DINTEK is an ISO 9001:2008 certified manufacturing company, designing and manufacturing all products under the management of a core team in Taiwan to ensure the highest possible product quality.
DINTEK employ rigorous quality control systems and close standards associations to assure the best product quality and performance. Ongoing research and development ensures constant advancement in both quality and innovation. A 25-year warranty is available on all certified network installations utilising DINTEK products.


One example of DINTEK innovation is the TECHBENCH termination kit. The kit simply clips to the front of a rack in seconds using the included brackets to provide a secure and comfortable work surface for the termination of patch panels.

To see how easy the TECHBENCH is to use and the simplicity of the design you can watch the video at the following link:  https://youtu.be/jOUgs8Vtvuo


Other innovations by DINTEK include the RJ-45 Pass Through Ezi-plug. Its design allows the wires to pass through the connector to be pulled snugly into place so that the twists in each pair can be maintained closer to the contacts compared to conventional plugs. Minimising untwisted pairs equals better performance. The DINTEK Pass Through Crimp tool both crimps and trims the excess wires simultaneously which also speeds up the termination of the RJ-45 plug.

A video showing how much easier it is to terminate a cable with the RJ-45 Pass Through Ezi-plug is available here: https://youtu.be/I6mJnpMZ510


An extension of this is the DINTEK ezi-LOCK Solution. It is designed to prevent accidental removal of a cable from a switch or patch panel, which in some cases such as important servers or internet connections could cause a network outage and business down-time. The DINTEK RJ45 ezi-LOCK locking solution consists of the strain relief boot and individual locking pin, making the boots suitable for standard RJ45 plugs.

A video showing how this works is available at the following link: https://youtu.be/NDgdsVkOWy8

The high quality and standard of DINTEK cabling products is exemplified in the PowerMAX500 CAT6 UTP cable. This cable comes in a 305-metre box and is constructed using 23 AWG conductors. By keeping the conductor gauge size larger, there is less heat generation and less voltage drop over long distances, resulting in a better performing and safer cable run, particularly when new standard  PoE++ high wattage (up to 100W) devices are deployed. PowerMAX500 CAT6 cable has been tested up to 500MHz, so it can be used for 10Gbit installations for cable runs up to 70 metres.

A video explaining the benefits of PowerMAX500 High Performance Cabling and the new PoE++ standard can be viewed at https://www.youtube.com/watch?v=X8P7gQhcBNE

DINTEK also manufactures a range of optic fibre cables and fittings. An innovative product to quickly repair a damaged optic fibre is the Quick Connectors and the Mechanical Splice.

 Quick Connectors    Mechanical Splice

These do not require any special tools and allows an installer to quickly terminate an optic fibre or re-join a broken fibre.
More details on DINTEK products is available on the web site: https://www.dintek.com.au