Latest Software
DrayTek Device Finder V1.1.0
DrayTek Device Finder is a Windows utility to search the local network for attached DrayTek devices to aid management of these devices.
Features include:
- Search all the local network’s DrayTek devices, including Vigor Router / AP / Switch etc.
- Display devices’ Model Name, IP Address, MAC Address.
- Provides a link to the device’s web user interface
Click here to download the utility
Smart VPN Client V5.1.0
Improvements
- Support IKEv2 EAP tunnel for Windows 10.
- Support VPN server port setup for SSL tunnel.
- Add maximum characters placeholder for username/password setting.
- The default setting for “Fast SSL” is changed from enabled to disabled.
- Add “View Log” on the taskbar icon for a user directly viewing VPN logs.
- Add “Connect / Disconnect” on the taskbar icon for a user directly connecting/disconnecting the tunnel.
- Support “Active Profile” for “Auto run when system start up” feature. A user can choose which profile should be used.
- Fixed: An error occurred when “Display Scale” of Windows was set to 125%.
- Fixed: Windows would crash if a user shutdown the PC while SSL tunnel was up.
- Fixed: Unable to display the L2TP over IPsec setting profile completely.
Click here to download the Utility
VigorConnect V1.1.2
VigorConnect software provides centralized AP management for DrayTek TR-069 based access points. Features include device status, monitor status of devices and performing scheduled tasks such as firmware upgrade, configuration backup/restore and parameter profile for mass deployment of AP devices.
Supported devices
Model Firmware Requirement
VigorAP 710 v1.2.3 or later
VigorAP 810 v1.2.3 or later
VigorAP 902 v1.2.3 or later
VigorAP 903 v1.2.3 or later
VigorAP 910C v1.2.3 or later
VigorAP 920R Series v1.2.3 or later
More details on VigorConnect is available at: https://www.draytek.com/products/vigorconnect/
Currently only the Windows version is available.
For usage instructions refer to the application notes above.
Login details are included the application note: Add VigorAP from VigorConnect
https://www.draytek.com/support/knowledge-base/6004
Click here to download the software
Latest Application Notes
Wireless
Add VigorAP from VigorConnect
VigorConnect is a centralized management tool for DrayTek Vigor Access Points. This application note shows how to add the Access Points into VigorConnect by using the auto-discovery feature.
Click here to read this application note.
Provisioning Wireless setting to VigorAP by VigorConnect
VigorConnect is a centralized management tool for DrayTek Vigor Access Points. This application note shows how to provision wireless settings in DrayTek Vigor Access Points by using the VigorConnect tool.
Click here to read this application note.
Upgrade VigorAP’s Firmware by VigorConnect
This application note shows how to upgrade the firmware in DrayTek Vigor Access Points by using the VigorConnect tool.
Click here to read this application note.
Backup and Restore AP’s Config via VigorConnect
This application note shows how to backup and restore the CPE’s configuration by using VigorConnect. Also, how to check that the backup/restore has taken place, and how to find the location for saved configuration files.
Click here to read this application note.
Switch
Differences between Switch types
This application note describes the differences between each of the DrayTek switch products are categorized into different types: which are:
- Smart Lite
- Web Smart
- Layer 2 Managed
- Layer 2+ Managed
Click here to read this application note
Latest Firmware
Vigor2762 V3.9.1
Improvements
- The IP group can be used as source IP on NAT >> Open Ports.
- The IP address can be selected as a provider host in customized DDNS profile.
- Support SIP alias number.
- Add the TR-069 parameter of WAN1 >> PPPoE >> Fallback account.
- TR-069 parameter to execute the telnet command.
For a complete list of improvements refer to the release notes in the download link.
Click here to download the firmware.