Latest Video


How to Install VigorACS 2 in AWS Cloud

VigorACS 2 is a TR-069 based centralised management system for DrayTek’s Vigor devices. It is a management tool that would help Network Engineers and Systems Integrators to configure, monitor and manage DrayTek devices remotely from the comfort of their offices or homes.

Amazon Web Services allows you to set up a cloud-based management system running VigorACS 2.
This video shows how to install VigorACS 2 in Linux Ubuntu 18.04 using AWS cloud as the infrastructure server.


Webinar: DrayTek VPN Solutions Part 2 – LAN to LAN VPN Tunnels

This is the second part of our 4-part webinar series: VPN solutions in DrayTek routers.

In this webinar we start with an overview of LAN to LAN VPN tunnels then look at the configuration options in DrayTek routers as well as a configuration example.


Webinar – DrayTek VPN Solutions Part 3 – VPN Load Balancing

This is the third part of our 4-part webinar series: VPN solutions in DrayTek routers. In this webinar we look at VPN Load Balancing, where two or more VPN tunnels can be configured for load balance mode. We discuss how it works and the benefits of using VPN load balance. Configuration options as well as configuration examples are also covered.


Latest Application Notes


System Maintenance

Find the serial number of your Vigor router

The serial number of the router is usually required when making a warranty claim. This application note shows where to look to get the router serial number.  Also, in the latest firmware release version 3.9.1 there is an added feature under the Service Status menu which displays the router serial number.

For more details click here to read the application note.


VPN

How to configure OpenVPN in Vigor Router using XCA certificate and key management

This article shows how to use XCA, a free Certificate Authority (CA) software, to generate and manage the server and client certificate that required for OpenVPN configuration.

Click here to read the application note.

 

IKEv2 VPN with EAP Authentication from Windows to Vigor3900 by Smart VPN Client

Vigor3900 and Vigor2960 support IKEv2 with EAP authentication since firmware version 1.4.0. It can make IKEv2 VPN even more secure by additional username and password authentication and certificate verification. This article demonstrates how to create a self-signed certificate for server authentication, set up Vigor Router an IKEv2 VPN server, and how to establish a connection from Windows by Smart VPN Client v5.2.0.

Click here to read the article.


NBN

Transitioning Phone Services to the NBN

This article covers the different connection methods to the NBN and looks at one of the common issues where phone services are locked into the ISP supplied router. Here we provide a method where the DrayTek router can be used for business functions while still utilising the ISP supplied router for VOIP services.

Click here to read this article.


WAN

Adding LTE Connection to a Broadband Router using VigorLTE 200 or Vigor2620L in LTE Bridged Mode

This article provides a solution utilising the Vigor2620L or VigorLTE200 running in bridge mode to provide LTE WAN connectivity to a broadband router located in a data centre or communications room where the LTE signal is very weak or non-existent.

Click here to read the article.


VigorACS

Change VigorACS server port

VigorACS is a Vigor centralized management software, which supports STUN service, and ACS could also become a Syslog server. This article demonstrates how to change the service port for VigorACS.

Click here to read the application note.


VigorSwitch

Use Link Aggregation to increase bandwidth and redundancy between VigorSwitches

Link Aggregation is a method that helps to handle two or more physical links between two network devices. Owing to the combined links, the bandwidth between the Link Aggregation ports will break the speed limit of single Ethernet ports. Effectively associating the links between another switch or NAS supports Link aggregation, providing redundancy and improving performance.

Click here to read the application note.

 

How to Enable QinQ 802.1ad – VLAN Tunnelling in DrayTek VigorSwitch

This article shows how to configure a QinQ VLAN trunk between two DrayTek VigorSwitches. DrayTek VigorSwitches supporting the QinQ feature are: VigorswtchG2280, G2500, P2121, P2280, and P2500.

Click here to read the application note.


Firewall

How to Use Syslog in Vigor2960 and Vigor3900 to Monitor Visited Websites

A new feature has been added to Vigor2960/3900 in Firmware v1.4.4 that allows system administrators to monitor visited websites by using syslog. The method uses syslog to show the websites visited by LAN clients.

Click here to read the article.


Wi-Fi

802.11r Fast Roaming Using VigorAP 903

The VigorAP-903 supports roaming that can reduce latency when wireless clients connect to another closer AP. This functionality is very useful for VoIP/Video and other applications.
Since 1.3.4 firmware, VigorAP903 is now compatible with 802.11r enabled clients.
This application note gives details on how to configure 802.11r in the VigorAP 903.

Click here to read the article.


Latest Firmware


Vigor2120 V3.8.10
Improvements

  • Remove the weather radar channel (120, 124, and 128) from telnet commands.
  • Fixed: Unable to make connection between Vigor router and VigorACS when both
  • sides used HTTPS.
  • Fixed: Route policy (with load balance) did not work.
  • Fixed: Vigor router reboot after setting the telnet command “sys ver dbg”.

Click here to download the firmware.


Vigor2133 V3.9.1
Improvements

  • Fixed: 3G WAN in PPP mode was disconnected frequently.
  • Fixed: Could not use # as WLAN SSID.
  • Fixed: Wireless 802.1x connections were blocked intermittently.

For a complete list of improvements, refer to the release notes in the download link.

Click here to download the firmware.


Vigor2862 / 2862 LTE V3.9.1.1
New Features

  • Support IPTV diagnosis.

Improvements

  • Adjust the setting method for P5/WAN2.
  • Add the MyVigor Services>>Service Status page to display the service activation information.
  • Add the Station Control field in Central Management>>AP>>WLAN Profile.

For a complete list of improvements, refer to the release notes in the download link.

Click here to download the firmware.


Vigor2912 V3.8.10
Improvement

  • Allow checking VPN status via SNMP.
  • Route policy (with load balance) did not work.
  • Vigor router reboot after setting the telnet command “sys ver dbg”.

Click here to download the firmware.


Vigor2926 / 2926 LTE V3.9.1.1
New Features

  • Support IPTV diagnosis.

Improvements

  • Adjust the setting method for P5/WAN2.
  • Add the MyVigor Services>>Service Status page to display the service activation information.
  • Add the Station Control field in Central Management>>AP>>WLAN Profile.

For a complete list of improvements, refer to the release notes in the download link.

Click here to download the firmware.


Vigor2952 / 2952P V3.9.1.1
New Features

  • Support IPTV diagnosis.

Improvement

  • Add the MyVigor Services>>Service Status page to display the service activation information.
  • Add the Station Control field in Central Management>>AP>>WLAN Profile.
  • Add a check box to hide Group Password in Central Management >> Switch >> Profile page.

For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.


Vigor3220 V3.9.1.1
New Features

  • Support IPTV diagnosis.

Improvement

  • Add the MyVigor Services>>Service Status page to display the service activation information.
  • Add the Station Control field in Central Management>>AP>>WLAN Profile.
  • Support Exception list for load balance in WAN>>General Setup.

For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.


VigorAP 900 V1.2.7
Improvement

  • Support SMTP port and SSL options on System Maintenance >> Syslog / Mail Alert setup.
  • Failed to set correct Management VLAN ID on LAN >> General Setup.

Click here to download the firmware.


VigorAP 903 V1.3.4
Improvement

  • Add Device Object and integrate with WLAN access control & Schedule.
  • Support VID (VLAN Tag) for wireless clients via mesh network.
  • Support IEEE 802.11r.
  • Support a speed-test between Mesh node & Mesh root via web.
  • RADIUS server profile page corrupted when adding users.

Click here to download the firmware.


VigorAP 903 V1.3.4.1
Improvement

  • Fixed: Unable to sync VLAN ID from mesh root to mesh node.

Click here to download the firmware.


Vigor2620L v3.8.13

Click here to download the firmware.


VigorLTE200 v3.8.13

Click here to download the firmware.


Latest Software


Smart VPN Client V5.2.0

New Features

  • Support new VPN type – OpenVPN (only supported in Windows 7 and above). To use OpenVPN, you MUST manually pre-install the OpenVPN Client in the PC.

Improvement

  • Support the function of exporting / importing SmartVPN profile.
  • Support the function of importing “ovpn” config file into SmartVPN client.

Click here to download the software.


DrayTek Wireless (iOS) V1.0.7

Latest version of iOS app to easily setup and manage the Mesh Wireless networks.

Click here to download the app.


Smart VPN Client (iOS) V1.5.0

Latest version of the Smart VPN client for iOS devices.

Click here to download the app.


Latest APP


Smart VPN Client (iOS) V1.6.1

This updated version now Supports iOS 13 dark mode

Click here to download.


Latest Live Demo


Vigor2133 V3.9.1

Click here for the live demo.


Vigor2762 V3.9.1

Click here for the live demo.