Latest Application Notes


Wireless
How to monitor the temperature by using built-in Temperature Sensor (For VigorAP1000C/920/918R)
The built-in Temperature Sensor in the VigorAP100c/920R/918R can be used to prevent devices from being damaged due to high environmental temperatures. These devices will also send out temperature alerts when temperature thresholds are exceeded.

This application note shows how to monitor the internal temperature and make APs send Syslog/Mail alerts when abnormal temperatures are detected.

Click here to read the application note.


VPN
IKEv2 VPN with EAP authentication from iOS to Vigor Router
IKEv2 with EAP authentication was introduced in the latest firmware versions for DrayTek routers to make VPN connections more secure by adding username / password authentication and certificate verification.

This application note demonstrates how to create a self-signed certificate for server authentication, set up Vigor Router an IKEv2 VPN server, and how to establish a connection from iOS.

Click here to read the application note.


Solve the Can’t find VPPP adapter Error of Smart VPN Client
This application note provides a number if steps to troubleshoot and resolve an issue when you get the error message “Can’t find VPP adapter !!!” when using Smart VPN client.

Click here to read the application note.


LAN
Use Purple WiFi as the External Hotspot Portal Server
This application note shows how to set up Purple WiFi as the External Portal Server in Hotspot Web Portal function, so that your hotspot clients can get Internet access by visiting the page on Purple Wi-Fi, and you can manage the login users on Purple WiFi’s webpage as well. Before setting up this function, you will need to sign up for a Purple WiFi account.

Click here to read the application note.


How to set up Purple WiFi as an external Hotspot Portal Server (For VigorAP 1060C/960C/AP912C/903)
This application note shows how to set up Purple WiFi as the external Hotspot Portal server for VigorAP (1060C/ 960C/ AP912C/ 903).

Click here to read the application note.


System
How to use a Vigor LTE router as a SMS Gateway
Vigor LTE routers are able to not only notify administrators about WAN/ VPN connection status and Web UI login/ config-changed, but also provide SMS PIN code authentication for hotspot web portal clients. However, Vigor Non-LTE routers need SMS providers to implement these SMS features. This article will demonstrate how to setup a Vigor LTE router as the SMS provider and make Non-LTE routers send SMS messages via this LTE router.

Click here to read the application note.


Security
Use mOTP for Remote Access
This application note provides details for mOTP which is a one-time password (OTP) that is valid for only one login session, protecting the password-based authentication from replay attacks. For the router’s remote access (log in from the WAN interface), you may use OTP and add a layer of security to your router and the local network. This requires a device, usually a mobile phone, generating the one-time password.

Click here to read the application note.


Routing
Change the default route by Route Policy
This application note shows how to specify WAN interface for packets on the basis of Route Policy.

Click here to read the application note.


Latest Firmware


Vigor2620 LTE V3.9.2
New Features

  • Add the new function of SMS Gateway for LTE.

Improvements

  • Support HTTP security header.
  • Layout improvement of the web user interface.
  • Increase the default UDP Flood Defense Threshold.
  • Fixed: An issue that the SMTP port value for StartTLS was not accepted by the Vigor router

Click here to download the firmware.

VigorLTE 200  V3.9.2
New Features

  • Add the new function of SMS Gateway for LTE.

Improvements

  • Support HTTP security header.
  • Layout improvement of the web user interface.
  • Increase the default UDP Flood Defense Threshold.
  • Fixed: An issue that the SMTP port value for StartTLS was not accepted by the Vigor router

Click here to download the firmware.

Vigor2926 / 2926 LTE V3.9.5
Improvements

  • Support “auth-nocache” setting on “.ovpn” file.
  • Support full version of WLAN profile for AP mode.
  • Support WAN IP Alias used for Dynamic DNS client of DrayOS.
  • Support for VLAN over Mesh (Bridge VLAN to Mesh) for multi-subnets and isolated guest Wi-Fi.
  • Add an option of VPN server for Brute Force Protection on System Maintenance>> Management.
  • Fixed: An issue of Mesh reconnection.
  • Fixed: An issue of conditional DNS forwarding working for VPN user.
  • Fixed: A display issue of “DHCP IP Assignment Table” on Diagnostics>>View DHCP Assigned IP Addresses.

Click here to download the firmware.


Latest Software


VigorACS 2 V2.5.5.2
Support Model and Version
For the full model support list, please refer to Compatible Devices section at:
https://www.draytek.com/products/vigoracs-2/

Improvement

  • Fixed: An issue of failure to start VigorACS after installing on Windows.

Click here for more details.

For existing customers wishing to upgrade to the latest release, please contact us at support@draytek.com.au for download instructions.