Latest Video


Setting up Vigor2620Ln for VDSL Bridge Mode

This video describes setting up Vigor2620Ln for VDSL bridge mode. It is based on the application note: at https://faq.draytek.com.au/2022/02/17/how-to-configure-vigor2620ln-for-vdsl-bridge-mode/

Click here to watch the video.


Latest Application Notes


Geo-Blocking Incoming Traffic WAN to LAN

This application note shows how to block certain countries from accessing your local LAN services. It applies to current model routers (Older model routers do not support Geo-Blocking from WAN to LAN).

Click here to read the application note.

 


Security

Use 2-Step mail Authentication for Remote Access

This application note shows how to set up 2-Step Authentication for the router’s remote access, and add a layer of security to the router.

When 2-Step Authentication is enabled, the Internet user will not only need the administrator password but also the Auth-Code sent to the specific phone number or email address, to log into the router’s management page.

Click here to read the application note.

 


Enhancing DNS Security in Vigor routers to protect users from malware and phishing

This application note discusses use of some public DNS servers which provide malware blocking and privacy guarantees to help protect your network from cyber threats as alternatives.

Click here to read the application note.

 


WAN

Change the VLAN ID range reserved by Vigor Router itself

Some ISP providers require a VLAN tag for Internet connection. However, we would find that Internet connection could not work when setting a specified VLAN tag value on WAN Interface. That may be due to the VLAN ID having been reserved by Vigor Router. In this case, we need to change the range of the VLAN ID reserved for the system to make the Internet connection work.

Click here to read the application note


Latest Firmware


Vigor2862 / 2862 LTE V3.9.8
Improvements

  • Support for IKEv2 fragmentation
  • Add a new alert message “[X.X.X.X] CHAP Login Failed ()” for mail alert
  • Upgrading WAN2 driver to support new Ethernet PHY. Note that downgrading the firmware may disable WAN2 functionality due to incompatibility with older firmware
  • Fixed: Authorized HTTP stack-based buffer overflow

Click here to download the firmware.


Vigor2915 V4.3.3.1
Improvement

  • Modify TR-069 default settings for France.

Click here to download the firmware.


Vigor3910 V4.3.1

New Features

  • New VPN protocol, WireGuard
  • Support USB Storage and USB Thermometer
  • Support PIN Generator for Hotspot Web Portal setup
  • Support SD-WAN feature for managed by VigorACS3
  • Support VPN authentication via Google Authenticator APP (TOTP)
  • Support Objects Setting>> Objects Backup/Restore
  • Support System Maintenance >> Webhook, for sending periodic keepalive/heartbeat to the Monitoring Server

Improvements

  • Support schedule for VPN remote dial-in user profile.
  • Support for IKEv2 fragmentation.
  • Support for More Local Network (Multiple SA) on IPsec profile.
  • Support for specifying VPN service to specific WAN interfaces.
  • Support to specify remote VPN gateway with the domain name (LAN to LAN)

For a complete list of improvements, refer to the release notes in the download link.

Click here to download the firmware.

 


VigorAP 1060C V1.4.5
Improvements

  • Support AP management using SSH
  • Support 802.11ax and 160MHz on APM WLAN Profile
  • Support “AutoSelect” for the 2.4GHz channel as the default setting
  • Add a note and a pop-up alert to notify the user not to enable Management VLAN when using the Mesh function
  • Fixed: Setting special characters on the Device Object configuration file
  • Fixed: Display issue of schedule status indicator if Daylight Saving was enabled
  • Fixed: Login device by using the admin password (set with special character “&”)

Click here to download the firmware


VigorAP 802 V1.4.4
Improvements

  • Add a note to remind the user that the system will reboot after finishing the firmware upgrade
  • Add a note and a pop-up alert to notify the user not to enable Management VLAN when using the Mesh function
  • Add new options to enable or disable the HTTP server, HTTPS server, and/or the function of Enforce HTTPS Access
  • Fixed: AP registration to Vigor router
  • Fixed: Login device by using the admin password (set with special character “&”)
  • Fixed: Hostname change and display on VigorACS >> Monitoring >> Logs >> Device SysLog

Click here to download the firmware.


VigorAP 903 V1.4.3
New Features

  • Add master AP group ID and group key
  • Add the default DHCP client ID for identifying VigorAP

Improvements

  • Support AP management using SSH
  • Improvements for Config backup/restore and Firmware Upgrade
  • Support “AutoSelect” for the 2.4GHz channel as the default setting
  • Add a note to remind the user that the system will reboot after finishing the firmware upgrade

For a complete list of improvements, refer to the release notes in the download link.

Click here to download the firmware

 


Vigor167 V5.1
New Features

  • Support the complete router mode and offers more network connection functions (e.g., PPPoE, PPPoA, DHCP, Virtual WAN, Dynamic DNS, Bind IP to MAC, DHCP Options, NAT, IGMP, Object Settings, Certificates, Monitoring table, Ping Tool, and Registration & Services)

Click here to download the firmware.


Vigor2135 V4.4.1
Improvements

  • Modify the WUI of 2FA verification code input
  • Support static route session for hardware acceleration
  • When Mesh Root is enabled, the WAN TCP port number 9608 will be closed
  • Support WANx First (WAN Interfaces) for DrayDDNS, Dynamic DNS Account
  • Fixed: An issue connecting to GenieACS

Click here to download the firmware.


Vigor2765 V4.4.1
Improvements

  • Modify the WUI of 2FA verification code input
  • Support static route session for hardware acceleration
  • Enable SOS/ROC as default (for the Australian country code only)
  • When Mesh Root is enabled, the WAN TCP port number 9608 will be closed
  • Support WANx First (WAN Interfaces) for DrayDDNS, Dynamic DNS Account
  • Fixed: An issue of connecting to GenieACS

Notes:

  • For SOS/ROC compatibility use firmware Vigor2765_v4.4.1_MDM2 or Vigor2765_v4.4.1_MDM4.
  • SOS/ROC settings enabled by default in this firmware

Click here to download the firmware.


Vigor2766 V4.4.1
Improvements

  • Modify the WUI of 2FA verification code input
  • Support static route session for hardware acceleration
  • When Mesh Root is enabled, the WAN TCP port number 9608 will be closed
  • Support WANx First (WAN Interfaces) for DrayDDNS, Dynamic DNS Account
  • Fixed: An issue of connecting to GenieACS

Click here to download the firmware


VigorAP 912C V1.4.5
Improvements

  • Add new options to enable or disable the HTTP server, HTTPS server, and/or the function of Enforce HTTPS Access
  • Fixed: An issue of logging to VigorAP through the protocol of SSH
  • Fixed: An issue of enabling WMM Capable on Wireless LAN (2.4GHz)>>General Setup
  • Fixed: An issue of displaying the notification message for 802.11r on the Wireless LAN >> Roaming >> Enable 802.11r page

Click here to download the firmware


Latest Software


VigorACS 3 V3.2.0

New Features

  • Support OOBE feature
  • Support forgot password feature
  • Support Leaflet map (another free Map API)
  • Support InfluxDB Backup and Restoration
  • Support XMPP Server (required to be set up by the user additionally)

Support Model and Version
For the full model support list, please refer to Compatible Devices section in URL:
https://www.draytek.com/products/vigoracs-3/

Improvements

  • Support to sort parameter list table.
  • Add a new user role, Commissioning user.
  • Increase SMTP password string to 256 characters.
  • Add API configuration option to external user profile.
  • Add a new option, VPN Server for VPN brute force protection.
  • Add support for hostname in the remote management access list

For existing customers wishing to upgrade to the latest release, please contact us at support@draytek.com.au for download instructions.

If you wish to test the software, contact us at support@draytek.com.au for a 30 day trial of the software.


DrayTek Wireless (Android) V1.1.2

The app allows you to easily setup and manage the Mesh Wireless network.
Click here to download the app.


DrayTek Wireless (IOS) V1.1.3
The app allows you to easily setup and manage the Mesh Wireless network.
Click here to download the app.


To Review the latest DrayTek Webinars

If you have missed the latest DrayTek webinars, you can review them at the links below:

 

  1. DrayTek Wireless Mesh Solutions Part 1
    https://www.youtube.com/watch?v=xY2JrUN9ZBI
  2. DrayTek Hardware Acceleration
    https://www.youtube.com/watch?v=a0RugySLBoE
  3. 802.11ax Wi-Fi (Wi-Fi 6) and its Benefits
    https://youtu.be/PI4q1KmfVck
  4. DrayTek Wireless Security
    https://www.youtube.com/watch?v=YLuXhPP2AWg
  5. USB Applications in DrayTek Routers
    https://www.youtube.com/watch?v=0DL1MTla0q8