Overview
- 28-port Web Smart Gigabit Switch
- 24 x Gigabit Ethernet Ports with PoE+
- 4 x Gigabit RJ-45/SFP Combo Ports
- PoE ports 802.3at and 802.3af compliant providing up to 30W per port
- PoE power budget of 400 watts
- PoE Scheduling & Ping watchdog power cycle
- Port based and 802.1q tagged VLANs
- Voice and Surveillance VLANs with QoS (OUI Mode) providing improved call and video quality
- ONVIF (Open Network Video Interface Forum) compliant
- QoS with 8 queues for traffic prioritisation
- IP Conflict Prevention to avoid IP conflicts caused by misconfigured or malicious hosts
- IEEE 802.3az (Energy-Efficient Ethernet) Compliant
- Support SNMP v1/v2c/v3, RMON, and Syslog for network monitoring
- Port Mirroring & Link Aggregation
- Compliant with Central Switch Management features of DrayTek Vigor devices for simplified network management Learn more
- Compliant with VigorConnect free software for local network management Learn more
- Supports VigorACS 3 Central Management Software for remote management
- 2 years back to base warranty
PoE+ (400W) 28-Port Web Smart Managed Gigabit Switch
The VigorSwitch P1282 is a Web Smart Managed PoE+ Switch with 24 x Gigabit Ethernet PoE/PoE+ ports and 4 x SFP/GbE Combo ports for optic fibre modules or DAC cables.
Each of the 24 PoE/PoE+ Gigabit Ethernet ports supports the 802.3at and 802.3af PoE standards, providing up to 30W per port (with a total of 400 watts power budget). This provides power for devices such as wireless Access Points, IP phones, and IP cameras, without needing to install additional adapters.
The VigorSwitch P1282 integrates with many network functions of DrayTek routers, including QoS, Port Mirroring, VLAN network security, Spanning Tree Protocol, and SNMP. This switch is fully compliant with IEEE 802.3az Energy-efficient Ethernet protocol and can be configured from DrayTek routers that support Central Switch Management. The Voice VLAN feature automatically identifies VoIP traffic and assigns it to the designated VLAN, and provides the best possible call quality.
-
-
- Power Socket
- LED Indicator
- Reset Button
- 24 x PoE/PoE+ Gigabit Ethernet ports
- 4 x Gigabit Ethernet/SFP Combo ports
-
Key Features
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn PoE devices on/off periodically with PoE Schedule.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
PoE Device Check
Enable Ping Watchdog for all PoE devices. If they lose their network connection, automatically restart them with a power cycle.
Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
ONVIF-Friendly
Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Web-Based GUI
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Central Switch Management
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
ONVIF-Friendly
Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance
Centralised Hierarchical View
The VigorSwitch G1282 automatically detects ONVIF devices and displays the topology of connected IP cameras and NVRs.
Image Viewing
Images filmed by IP cameras can be viewed directly within the VigorSwitch G1282 web UI.
Device Management
Basic configuration/maintenance tasks for ONVIF devices such as remote reboot, factory reset and changing network settings can all be done remotely from the VigorSwitch G1282 web UI.
ONVIF Snapshot Alert
Locating Non-Responding IP Cameras Made Easy
Managing a network of IP cameras across different locations is difficult, as when any of the cameras stops functioning, there is no easy way to detect or revive it. To help with this problem, the VigorSwitch G1282 regularly pings ONVIF IP cameras and takes snapshots from them periodically. If one IP camera stops responding, an email alert is sent with the latest snapshot from the camera.
With PoE VigorSwitch models, the switch can also provide first aid by automatically power cycling the particular port to reboot the camera.
IP Conflict Detection & Prevention
Conflict Detection
The VigorSwitch constantly checks the network environment and notifies the administrator of any IP conflicts.
Conflict Prevention
For a more stable network, the VigorSwitch detects misconfigured or malicious IP hosts and blocks them before damages are done.
LAN Device Check
Ping Watchdog for LAN Devices
VigorSwitch keeps pinging on the LAN devices. Once a device stops responding, the PoE switch cycles a port or sends an email alert.
ONVIF-Friendly
An all-in-one management platform for Vigor devices on the LAN side.
Automatic Device Discovery
Connect a Vigor Switch or AP to the LAN side of the Vigor Router, and the router will auto-discover the device to allow it to be managed.
Provisioning
Basic settings may be done on the Vigor Router, and then provisioned to the managed Vigor Switches or APs.
Monitoring
The Vigor Router provides a centralized view of managed devices, so you can monitor and check the status of Vigor Switches or APs connected.
System Maintenance
Perform factory resets, save/restore configuration backups, or trigger reboots remotely from the Vigor Router’s interface. There is no need to log in to each device’s management page.
Management Solution
| All-in-One Management |
|---|
 Central Switch Management |
|
| Software Management |
|---|
 VigorConnect (FREE) |
|
 VigorACS 3 |
|
In-the-box
Config Demo
