Latest Application Notes


Vigor Switch Naming Rules

This is an updated application note explaining the DrayTek naming rules for VigorSwitches. This will help you to identify the VigorSwitch features based on the model’s name.

Click here to read the application note.


Loopback Interface for Vigor Router Management

This application note describes how to use the new Loopback Interface setting available in the latest router firmware. This feature can be used to connect to management services such as Web (HTTPS), SNMP, ACS (TR069), Syslog or SSH as well as authentication services such as TACACS+ or RADIUS instead of using a LAN IP.

Click here to read the application note.


Fast Transition Roaming 802.11r on VigorAP

This application note describes the 802.11r Fast Transition roaming protocol which is available in the latest model access points and how it can help to reduce latency when roaming.

Click here to read the application note.


Latest Firmware


Vigor167 V5.1.2
Improvements

  • Support special characters – , % for TR-069 username/password
  • Support special characters \ _ @ . ( ) – / % for PPPoE username/password
  • Fixed:  Packet loss (at y.1731)
  • Fixed: VDSL compatibility issue with the vendor’s serial number/version number information

Click here to download the firmware.


Vigor2760 Delight V3.8.9.6
Improvements

  • Improve Web GUI Security (CVE-2022-32548)
  • Improve the OpenSSL security (CVE-2022-0778)

Click here to download the firmware.


Vigor2860 / 2860 LTE V3.9.2
Improvements

  • Improve Web GUI Security (CVE-2022-32548)
  • Improve the OpenSSL security (CVE-2022-0778)

Click here to download the firmware.


Vigor2925 / 2925 LTE V3.9.2
Improvements

  • Improve Web GUI Security (CVE-2022-32548)
  • Improve the OpenSSL security (CVE-2022-0778)

Click here to download the firmware


VigorAP 802 V1.4.7
Improvement

  • Fixed: WUI stopped responding after changing the administrator password

Click here to download the firmware.


VigorAP 903 V1.4.6
Improvements

  • Fixed: AP-Assisted Roaming Minimum RSSI not working
  • Fixed: TR-069 disconnection after VigorAP was up for more than 12 hours
  • Fixed: 2.4GHz WPS not working unless a 5GHz client had connected via 5GHz WPS
  • Fixed: WUI stopped responding after changing AP as Range Extender (Quick Start Wizard)

Click here to download the firmware.


VigorAP 960C V1.4.5
Improvements

  • Support Allow management from WLAN (System Maintenance >>Management).
  • Fixed: APM failure on the Vigor router when upgrading the firmware of VigorAP from 1.4.3 to 1.4.4

Click here to download the firmware.


VigorSwitch FX2120  V3.7.4
New Feature

  • Support 10Gigabit Ethernet port auto linkup

Improvement

  • Fixed: (10G) port link aggregation not working after device reboot.

Click here to download the firmware


VigorSwitch G2540xs V3.7.4
New Feature

  • Support 10Gigabit Ethernet port auto linkup

Improvement

  • Fixed: (10G) port link aggregation not working after device reboot.

Click here to download the firmware


VigorSwitch P2540xs V3.7.4
New Feature

  • Support 10Gigabit Ethernet port auto linkup

Improvement

  • Fixed: (10G) port link aggregation not working after device reboot.

Click here to download the firmware


VigorSwitch PQ2200xb V2.7.4
New Feature

  • Support 10Gigabit Ethernet port auto linkup

Improvement

  • Fixed: (10G) port link aggregation not working after device reboot.

Click here to download the firmware


Latest Software


Smart VPN Client V5.6.1
New Feature

  • Support SSLVPN with TLS 1.3.

Improvements

  • Improve the long-time WireGuard VPN stability
  • Restrict VPN 2FA TOTP input field to 6 characters
  • SSL VPN can be used for verifying the Let’s Encrypt server certificate

For complete list of improvements refer to release notes in the download link below:

Click here to download the software


DrayTek Wireless (Android)  V1.1.3
This is a mobile application for on-premises VigorAP configuration and monitoring

Click here for more information and download link


Smart VPN Client (Android)  V1.3.0
Use this app to establish an SSL VPN Tunnel to DrayTek routers using an Android smart phone

Click here to download.


VigorACS 3 V3.3.0

New Features

  • Use LTS Java Version
  • Upgrade WildFly to 25.0.1
  • Upgrade MariaDB to 10.6.5
  • Upgrade InfluxDB to 2.1.1
  • Support chatbot and add notifications
  • Implement the SD-WAN phase II WUI
  • Support PIN as the hotspot login method
  • Support Let’s Encrypt certificate
  • Add new fields for setting domain name for remote node (VPN).

Support Model and Version
For the full model support list, please refer to Compatible Devices section in URL:
https://www.draytek.com/products/vigoracs-3/

Improvements

  • Unify the station list format for 2.4G/5G on VigorACS
  • Let the names/options on ACS and VigorAP are consistent
  • Allow changing the permission of MySQL DB backup and ACS relevant directory
  • Allow changing REST API WholesaleWizard to be able to add without specifying the expired date
  • Fixed: QoS rules

A complete list of improvement is available in the release notes at: https://fw.draytek.com.tw/ACS%203/Document/DrayTek_VigorACS%20V3.3.0_release-note.pdf

For existing customers wishing to upgrade to the latest release, please contact us at support@draytek.com.au for download instructions.
If you wish to test the software, contact us at support@draytek.com.au for a 30 day trial of the software.