Latest Application Notes


Using STARLINK Internet with DrayTek Vigor Routers


This application note describes how to setup the Starlink internet connection for DrayTek routers. It covers configuration steps to use the Ethernet WAN connection as well as router Wi-Fi WAN connection.  An application example is also described.

Click here to read the application note.


How to solve Starlink connection dropping intermittently and only a reboot will restore the connection to the internet

Some clients have reported intermittent micro-disruptions with Starlink, and when the internet is restored, there is no restoration of communication. A reboot of the router is necessary to get things working again. Using Ping Detect for WAN Connection Detection usually resolves this issue.

Click here to read the application note.


How to Configure VoIP on Vigor Router (2765Vac/2865Vac/2866Vac)

This application note shows the configuration steps to set up VOIP in a VOIP router such as the Vigor2765Vac, 2865Vac and 2866Vac.

Click here to read the application note.


DrayOS incoming traffic flow [WAN to LAN]

This application note shows the traffic flow through the various services in a DrayTek router. It will help to trouble shoot firewall related issues.

Click here to read the application note.


Redundant WAN and LAN Connections for Two-Router Network Failover

This application note describes how to set up a failover connection between two networks over an interconnected LAN connection by using the Load Balance/Route policy feature in each router.

Click here to read the application note.


Latest Firmware


VigorAP 902 V1.3.6

Improvement

  • Fixed: Unexpected 5GHz link speed 130Mbps (bandwidth 20MHz) instead of 780Mbps (bandwidth 80MHz) after Minimum RSSI Roaming.

Click here to download firmware.


VigorAP 910C V1.3.6

Improvement

  • Fixed: Unexpected 5GHz link speed 130Mbps (bandwidth 20MHz) instead of 780Mbps (bandwidth 80MHz) after Minimum RSSI Roaming.

Click here to download firmware.


Latest Software


VigorConnect V1.8.2

Improvement

  • Fixed: Failure to disable WUI HTTP function
  • Fixed: Failure to upgrade the firmware for some Vigor switches (e.g., VigorSwitch P1282, G1282, etc.) via Maintenance>>Firmware Upgrade.
  • Fixed: Inconsistency of the total client number between Active Clients and the Device Overview, on the Dashboard.

Click here to download VigorConnect.


OpenVPN Connection Issue

There have been some reports that OpenVPN stopped working with the latest updates to OpenVPN Connect v3.4 and OpenVPN Client v2.6. This new version changes some options in its configuration and now has stronger requirements for SSL negotiation.

The issue will be fixed in 2135/2765/2865/2927/2962/3910 v4.4.3, and Smart VPN client v5.6.3 also adds the changes to adapt OpenVPN Client v2.6.

There is no plan to update firmware for older model routers (2862/2926…etc), so continue to use OpenVPN Connect v3.3 and OpenVPN Client v2.5.8 instead.