New DrayTek 28-port L2+ Managed 10GbE PoE+ Switch – VigorSwitch P2282x

Overview

28-port Layer 2+ Managed 10 Gigabit Switch
- 24 x Gigabit Ethernet Ports with PoE+
- 4 x 10 Gbps SFP+ slots
128 Gbps Switching capacity
PoE ports 802.3at and 802.3af compliant providing up to 30W per port
PoE power budget of 400 watts
PoE Scheduling & Ping watchdog power cycle
Port based and 802.1q tagged VLANs
Voice and Surveillance VLANs with QoS (OUI Mode) providing improved call and video quality
ONVIF (Open Network Video Interface Forum) compliant
QoS with 8 queues for traffic prioritisation
IP Conflict Prevention to avoid IP conflicts caused by misconfigured or malicious hosts
IEEE 802.3az (Energy-Efficient Ethernet) Compliant
Support SNMP v1/v2c/v3, RMON, and Syslog for network monitoring
Port Mirroring & Link Aggregation
Compliant with Central Switch Management features of DrayTek Vigor devices for simplified network management
Learn more
Compliant with VigorConnect free software for local network management
Learn more
Supports VigorACS 3 Central Management Software for remote management
2 years back to base warranty

28-port Layer 2+ Managed 10GbE PoE+ Switch

The DrayTek VigorSwitch P2282x is a Layer 2+ Managed 10 Gbps PoE+ Switch. It features 24 Gigabit Ethernet LAN ports and 4 SFP+ 10Gbps fibre links for uplink/downlink. In addition to the fixed AC power input, the VigorSwitch P2282x offers a DC power input as an additional power source, which helps ensure uninterrupted operation and protects connected devices in the event of an AC power supply failure.

The VigorSwitch P2282x features 24 PoE+ ports with a 400W power budget, making it ideal for a wide range of IoT applications, including LED lighting, POS systems, motion sensors, IP cameras, and more. Equipped with a 12/54V DC backup power supply, the P2282x ensures continuous protection for critical data from connected PD devices while maintaining uninterrupted network connectivity.

With support for advanced Layer 3 features, including DHCP Server and VLAN Routing, the P2282x enhances network efficiency and ensures uninterrupted LAN connectivity, even during gateway downtime. This makes it an ideal solution for networks facing growing traffic demands.

24x PoE/PoE+ ports

10/100/1000Mbps Ethernet, RJ-45

4 x 10GbE SFP+ slots

1000Mbps/10Gbps fibre slot

400 watts

PoE Power Budget

Backup Power

2x DC redundant power socket

Interface

Console Port

24x PoE/PoE+ Gigabit Ethernet ports

4x 10GbE SFP+ Ports

2x DC Power Sockets (backup usage)

AC Power Supply

Advanced Layer 2+ Features

DHCP Server & VLAN Routing

Improving LAN Network Sustainability and Efficiency, with or without a Router

In an extensive LAN network, much traffic does not go to the Internet but to the servers within the LAN. For example, IP cameras store videos on the NVR, IP phones register with the PBX, and clients access the file server, among other things.

A Layer 2+ switch with DHCP server and VLAN routing functionalities, positioned to receive traffic before the router, is ideal for distributing the load on your router and ensuring your LAN network operates continuously, even when the router is offline.

The VigorSwitch assigns dynamic IP addresses to as many as 8 VLANs as a DHCP server. With VLAN routing, the VigorSwitch accommodates up to 512 routes.

Bind IP to MAC

Reserve an IP Address for an Important Device

As a DHCP server, the layer 2+ VigorSwitch assists in reserving IP addresses for your essential devices that users access frequently.

ONVIF-Friendly

Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance

Centralised Hierarchical View

The VigorSwitch P2282x automatically detects ONVIF devices and displays the topology of connected IP cameras and NVRs.

Image Viewing

Images filmed by IP cameras can be viewed directly within the VigorSwitch P2282x web UI.

Device Management

Basic configuration/maintenance tasks for ONVIF devices such as remote reboot, factory reset and changing network settings can all be done remotely from the VigorSwitch P2282x web UI.

ONVIF Snapshot Alert

Locating Non-Responding IP Cameras Made Easy

Managing a network of IP cameras across multiple locations can be challenging, especially when cameras stop functioning without an easy way to detect or restore them. The VigorSwitch P2282x solves this by regularly pinging ONVIF IP cameras and capturing periodic snapshots. If a camera becomes unresponsive, the switch automatically sends an email alert with the latest snapshot, allowing for quick diagnosis and resolution.

With PoE VigorSwitch models, the switch can also provide first aid by automatically power cycling the particular port to reboot the camera.

IP Conflict Detection & Prevention

Conflict Detection

The VigorSwitch continuously monitors the network environment and alerts the administrator of any IP address conflicts.

Conflict Prevention

To enhance network stability, the VigorSwitch identifies misconfigured or malicious IP hosts and blocks them before any damage occurs.

Device Check

Ping Check for LAN Devices

A VigorSwitch can continuously ping the LAN devices, and when the device stops responding to the ping, it will instigate a PoE cycle to the associated port (PoE model only) and/or send an email alert to the administrator.

LAN Management

An all-in-one management platform for Vigor devices on the LAN side.

Automatic Device Discovery

Connect a Vigor Switch or AP to the LAN side of the Vigor Router, and the router will auto-discover the device to allow it to be managed.

Provisioning

Basic settings may be done on the Vigor Router, and then provisioned to the managed Vigor Switches or APs.

Monitoring

The Vigor Router provides a centralized view of managed devices, so you can monitor and check the status of Vigor Switches or APs connected.

System Maintenance

Perform factory resets, save/restore configuration backups, or trigger reboots remotely from the Vigor Router’s interface. There is no need to log in to each device’s management page.

Key Features

PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.

icon_10g_sfp 10GbE SFP+
Provides 10GbE-capable fibre SFP+ ports for aggregation or uplinking to the core switches.

icon2024_poe_device Ping Device Check
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.

icon_onvif_friendly ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more

icon_wire_speed Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch P2282x to route the inter-VLAN traffic directly and offload the router.

icon_ipv6_ready IPv6 Ready
VigorSwitch P2282x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.

auto_surveillance Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.

icon_based_gui Web-Based GUI
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo

icon_ip_conflict IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more

multiple_admin Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.

icon_qos QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.

icon_central_switch Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more