Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

Blog

HomeHome»Blog»New Firmware and Application Notes for DrayTek Products ( 20 April 2018)

New Firmware and Application Notes for DrayTek Products ( 20 April 2018)

Latest Video


Disable the LED lights on the Vigor2862 Series

This video shows how to disable the LED indicators on the Vigor2862 series routers for the WAN, USB and LAN ports. This feature is available in firmware version 3.8.8 and above for the Vigor2862 router. It will be added to other router models as in updated firmware.

Watch now


New Application Notes


Miscellaneous

What is the LED status when Vigor Router is in TFTP mode?

When forcing Vigor Routers into TFTP mode for a firmware upgrade, the LEDs status for indicators flash differently for different models. This application note shows the LED status for different router models when they are in TFTP mode.

Read more


Firmware Updates


Vigor2860/2860L V3.8.7

Improvements

  • Improve stability of LTE module operation (for ‘L’ models).
  • Add TR-069 parameters for LTE ping keep alive.
  • Add auto reboot function for Vigor LTE WAN.
  • Corrected: Outbound SIP call disconnected after specific ITSP was used for 20 seconds.
  • Corrected: In PPTP VPN connection, remote dial-in user could not get DNS server IP from its LAN subnet.
  • Corrected: DHCP Server stopped working, when “Block IP packet from LAN with inconsistent source IP addresses” was enabled for IP Spoofing Defense option.

Click here to download


Vigor2120 V3.8.7

New feature

  • Support NAT >> ALG.
  • Support DrayOS IKEv1 IPSec XAuth for the security of network connection.
  • Support DrayOS IKEv2 for VPN connection.
  • Add “Panel Control” in System Maintenance.

Improvements

  • Support DHCP server options for LAN subnets on the advanced page of LAN>>General Setup.
  • The Protocol in NAT settings could be set to “TCP/UDP” by default instead of “—“.
  • Add Black/White List for DNS Filter Local Setting on CSM>>DNS Filter Profile.
  • Improvement for bandwidth limit with QoS.

For a complete list of improvements refer to the release notes available at the download link.

Click here to download


Vigor2912 V3.8.7

New feature

  • Support NAT >> ALG.
  • Support Diagnostics >> Route Policy Diagnosis.
  • Support DrayOS IKEv1 IPSec XAuth for the security of network connection.
  • Support DrayOS IKEv2 for VPN connection.
  • Add “Panel Control” in System Maintenance.

Improvements

  • Support DHCP server options for LAN subnets on the advanced page of LAN>>General Setup.
  • Able to forward packets from WAN to remote VPN network.
  • The Protocol in NAT settings could be set to “TCP/UDP” by default instead of “—“.
  • Add Black/White List for DNS Filter Local Setting on CSM>>DNS Filter Profile.
  • Improvement for bandwidth limit with QoS.

For a complete list of improvements refer to the release notes available at the download link.

Click here to download


Vigor300B v1.3.3

Improvements

  • Security fix.
  • Corrected: Issues related to unstable VPN disconnection.
  • Corrected: Remote dial-in users failed to make VPN connection under certain conditions.

Click here to download


Vigor2960 V1.3.3.1

Improvements

  • Security fix.
  • Corrected: Issues related to unstable VPN disconnection.
  • Corrected: Remote dial-in users failed to make VPN connection under certain conditions.

Click here to download


Vigor3900 V1.3.3.1

Improvements

  • Security fix.
  • Corrected: Issues related to unstable VPN disconnection.
  • Corrected: Remote dial-in users failed to make VPN connection under certain conditions.

Click here to download


Vigor2952 V3.8.8.1

New feature

  • Support 200 VPN tunnels.

Improvements

 

  • Allows to setup blank administrator password in Quick Start Wizard.
  • WAN connection (PPP IPv6) failed due to unknown reason.
  • Corrected: No data could be recorded on Syslog utility if Destination Port on SysLog / Mail Alert Setup was not set by default value.
  • Corrected: Bandwidth Limit could not limit the data traffic if IP Routed Subnet was enabled.
  • Corrected: L2TP over IPSec failed to work.

Click here to download


Vigor3220 V3.8.8.1

New feature

  • Support 200 VPN tunnels.

Improvements

  • Allows to setup blank administrator password in Quick Start Wizard.
  • WAN connection (PPP IPv6) failed due to unknown reason.
  • Corrected: No data could be recorded on Syslog utility if Destination Port on SysLog / Mail Alert Setup was not set by default value.
  • Corrected: Bandwidth Limit could not limit the data traffic if IP Routed Subnet was enabled.
  • Corrected: L2TP over IPSec failed to work.

Click here to download

Written by

The author didnt add any Information to his profile yet

Leave a Comment

*