Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

Column Content

Column Content

  • Overview
  • PLANET IAP-2001PE Industrial Access Point brings users the ideal solution for robust and long distance wireless access in harsh industrial network. The IAP-2001PE is specially designed for the Wi-Fi applications over a TCP/IP network in the hardened environment from -10 to 60 degrees C operating temperature. It comes with 802.11n Wireless interface for up to 300Mbps performance and provides 4 10/100Mbps copper ports with 1-port IEEE 802.3af PoE PD (Powered Device) inject interface delivered in an IP30 rugged strong case. Moreover, the IAP-2001PE provides one 100Base-FX SFP interface for optional use of single/multi-mode SFP module. The fiber optical interface of the IAP-2001PE not only functions for long distance expansion of Intranet LAN network, but also can perform as the Internet WAN fiber interface through the built-in management software configuration.
     
     
    Fiber Optic Link Capability for Flexible Distance Extension
    Equipped with one 100Base-FX SFP (Small-Form Factor Pluggable) interface, the deployed distance of the IAP-2000PE Industrial AP can be extended from 2km (via multi-mode fiber) up to above 60km (via single-mode fiber). In other words, the IAP-2001PE provides more flexibility for Transportation, Manufacturing, Security and Surveillance with distance extension without any limitation and is a suitable model either for long or short distance network deployment.

    Steady and Wide-ranging Wireless Network Communication
    The IAP-2001PE features 802.11n radio with 2T2R antenna technology compliant with 802.11b/g/n standards. It is equipped with two external 5dBi High-Gain antennas to provide strong signal and excellent performance even in the long range or bad environment. With detachable RP-SMA connector design in the IAP-2001PE, it allows users to manually exchange higher gain antenna for further wireless coverage range.

     
     
    Multiple Operating & Wireless Modes
    The IAP-2001PE supports multiple wireless connectivities: Wireless AP, Wireless Repeater, WDS Point-to-Point (PtP) and Point-to-Multipoint (PtMP), allowing various applications that give users more comprehensive experience. It also helps users to easily build wireless network and extend the wireless range of the existing wireless network.
     
     
    Wide Range of Wireless Security Supports
    To secure the wireless communication, the IAP-2001PE supports up-to-date encryption, WPA-PSK / WPA2-PSK with TKIP / AES encryption. In order to simplify the security settings, the IAP-2001PE supports Wi-Fi Protected Setup (WPS) configuration with PBC/PIN type, by just clicking the options and the secure connection between AP and wireless client will be built immediately.

    Industrial Grade Fiber Router
    The IAP-2001PE is also a perfect Industrial Fiber Router which can provide very high performance for Internet access, both downstream and upstream up to 100Mbps through the fiber interface. Moreover, the IAP-2001PE not only provides basic router functions like DHCP server, Virtual Server, DMZ, and UPnP, but also offers full firewall functions including Network Address Translation (NAT), IP / Port / MAC filtering. It serves as an Internet firewall to protect your network from being accessed by unauthorized users.

    IPv6 / IPv4 Web and SNMP Management
    The IAP-2001PE supports both IPv6 and IPv4 web management functions. Its SNMP feature allows the system administrator to remotely monitor and control the network devices more efficiently. With the friendly management interface and plenty of management functions included, the IAP-2001PE is the best choice for system integrators to build large scale wireless service and to connect with the IPv6 network.

    Easy Installation and Wide Range of Power Usages
    The IAP-2001PE is packaged in a strong IP 30 case that allows either DIN rail or panel mounting for efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operations. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

    Flexible Deployment with PoE Feature
    Compliant with IEEE 802.3af Power over Ethernet standard, the IAP-2001PE can be powered and networked by a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on the wall, ceiling or any other place that is difficult to reach. The wireless AP deployment becomes more flexible and worries free from the power outlet locations.

     
  • Applications
  • High Speed Wireless LAN Applications in Hardened Environment
    Compliant with IEEE 802.11n and 802.11b/g standards, the IAP-2001PE provides a better wireless signal, higher data rate and performance than standard 802.11g wireless AP. Furthermore, the IAP-2001PE features the latest security and multiple SSID functions to prevent unauthorized access or invasion.
     
     
  • Key Features
  •   • IEEE 802.11n wireless LAN speed up to 300Mbps
      • 2 x 5dBi detachable omni-directional antenna
      • 4 x 10/100Base-TX ports with 1-port PoE (PD, Powered Device) and 1 x 100FX port (SFP slot)
      • IPv4 / IPv6 Web management
      • Supports 64/128-bit WEP, WPA / WPA2, and WPA-PSK / WPA2-PSK, 802.1x
      • Supports WISP mode, IEEE 802.1Q VLAN
      • -10 to 60 degrees C operating temperature
      • Redundant power design
      • IP30 aluminum case protection / DIN rail and wall-mount design
     
  • Specifications
  • Hardware Specifications
    10/100Base-TX Ports 4 x 10/100Base-TX auto-negotiation
    Auto MDI / MDI-X
    IEEE 802.3af PoE Ports 1 x PD (Port-1)
    Fiber Port Type Single / multi-mode (Varies on SFP)
    Antenna 2 x Detachable RP-SMA connector
    2 x 5dBi SMA omni-directional antenna included in the package
    Enclosure IP30 metal case
    LED Indicators P1, P2, PWR, FAL, FX, WPS, WLAN, SEC, LAN1~4, PoE
    Button WPS button
    Reset button
    Dimensions (W x D x H) 87.8 x 135 x 56 mm
    Weight 871g
    Power Requirements DC 12-48V / AC 24V
    Installation DIN rail kit and wall mount ear
    Wireless Interface Specifications
    Standard Compliant with IEEE 802.11b/g/n
    Frequency Band 2.4 to 2.4835GHz (Industrial Scientific Medical Band)
    Modulation Type DSS with DBPSK, DQPSK, QPSK and CCK
    OFDM with BPSK, QPSK, 16-QAM and 64-QAM
    Wireless Data Rate 802.11b: 1/2/5.5/11Mbps
    802.11g: 6/9/12/18/24/36/48/54Mbps
    802.11n: 14/29/43/58/87/116/130/144Mps in 20MHz
        30/60/90/120/180/240/270/300Mbps in 40MHz
    Opt. Channel America / FCC: 2.414~2.462GHz (11 Channels)
    Europe / ETSI: 2.412~2.472GHz (13 Channels)
    Japan / TELEC: 2.412~2.484GHz (14 Channels)
    RF Output Power 802.11b: 18 dBm
    802.11g: 15 dBm
    802.11n: 15 dBm
    Receiver Sensitivity 802.11b CCK 1.0Mbps: -94dbm
    802.11b CCK 11.0Mbps: -91dbm
    802.11g OFDM 6Mbps: -92dbm
    802.11g OFDM 54Mbps: -76dbm
    802.11n 20MHz MCS7: -72dbm
    802.11n 40MHz MCS7: -70dbm
    Wireless Management Features
    Operation Mode Access Point, Client, Gateway, WDS Bridge, Repeater, WISP
    Channel Width 20MHz / 40MHz
    Data Encryption Security 64 bit / 128 bit WEP
    WPA / WPA2
    WPA-PSK / WPA2-PSK
    802.1x Network Access Control
    Management Web-based Configuration
    Wireless Isolation Yes
    Protocol
    Protocol / Feature Bridge and WISP mode
    WDS and WPS
    Static Routing and RIPv1/2
    DMZ and Virtual Server
    802.1D
    802.1Q VLAN
    QoS
    SNTP
    WMM
    DHCP Server / Client
    IGMP Proxy and DNS Proxy
    UPnP and DDNS
    SNMP
    Management Web-based configuration
    Standards Conformance
    Standards Compliance IEEE 802.11b/g and 802.11n Wireless LAN
    IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3x Full-Duplex Flow Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.1Q VLAN
    Environment Specification
    Temperature / Humidity Operating: -10~60 degrees C, 5%~ 90% (non-condensing)
    Storage: -20~70 degrees C, 0~95% (non-condensing)
    Emission FCC, CE
    Stability Testing IEC60068-2-32 (Free Fall)
    IEC60068-2-27 (Shock)
    IEC60068-2-6 (Vibration)
  • Downloads

  • Datasheet

    Date Version Description Download
    2012-04-27 1.0 IAP-2001PE


    Firmware

    Date Version Description Download
    2012-04-27 1.1b120131 Initial Release


    User’s Manual

    Date Version Description Download
    2012-03-02 1.2 Initial Release.


    GPL Code

    Date Version Description Download
    2014-06-27 1.0 GPL Code

    Ordering Information
    IAP-2001PE Industrial 802.11bgn Wireless Access Point (2T2R, PD support + 1 FX SFP)