Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

Column Content

IGS-20160HPT

Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/100T + 2-Port 100/1000X SFP Managed Switch (-40~75 Degrees C)

1icon_IPv6-Management icon_SSL-SSH 8icon_802.3at_802 8icon_-40-degree-~75-degree 6icon_RING

  • Overview
  • Environmentally Hardened Design
    PLANET Industrial 16-Port Gigabit 802.3at PoE+ Switch, IGS-20160HPT, is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-20160HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-20160HPT can be placed in almost any difficult environment. The IGS-20160HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.
     
     
    Redundant Ring, Fast Recovery for Surveillance System
    The IGS-20160HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-20160HPT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
     
     
    High Power PoE for Security and Public Service Applications
    To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-20160HPT provides 16 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat.5E/6 Ethernet cable. With a total 320-watt PoE budget on the whole system, the IGS-20160HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other PoE network devices by providing PoE power, doubling that of the current conventional 802.3af PoE.
     
     
    Intelligent Alive Check for Powered Device
    The IGS-20160HPT PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-20160HPT will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.
     
     
    PoE Schedule for Energy Saving
    Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-20160HPT can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
     
     
    Digital Input and Digital Output for External Alarm
    The IGS-20160HPT supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-20160HPT port shows link down, link up or power failure.
     
     
    Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the IGS-20160HPT not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer 2 Features
    The IGS-20160HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-20160HPT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-20160HPT allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 10 trunk groups with 4 ports per trunk group, and supports fail-over as well.

    Efficient Management
    For efficient management, the IGS-20160HPT Managed Ethernet Switch is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-20160HPT offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-20160HPT can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMP v3 connection which encrypts the packet content at each session.

     
    Powerful Security
    The IGS-20160HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before.

    Flexibility and Extension Solution
    The two mini-GBIC slots built in the IGS-20160HPT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
    The IGS-20160HPT provides 16 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 16 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the IGS-20160HPT can connect to core fiber switch and send video stream to NVR and monitoring center. Through the high-performance switch architecture, the IGS-20160HPT facilitates the recorded video files from the 16 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-20160HPT undoubtedly brings an ideal secure surveillance system at a lower total cost.

     
     
  • Applications
  • Industrial Area Department/Workgroup PoE Switch
    Providing up to 16 PoE+, in-line power interfaces, the IGS-20160HPT can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 16 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-20160HPT makes the installation of IP cameras or wireless AP easier and more efficient.
     
     
    High Power IP Surveillance and Wireless LAN Service in Public Transportation
    With IEEE 802.3at Power over Ethernet Plus standard, the IGS-20160HPT can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Wireless LAN would be more efficient for the transportation station to provide high speed and wide area Internet services for travelers. With the PoE wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.
     
     
  • Key Features
  • Physical Port

    • 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
    • 2 10/100/1000BASE-T Gigabit Ethernet RJ45 ports
    • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
    • One RJ45 console interface for basic management and setup

    Power over Ethernet

    • Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
    • Up to 16 IEEE 802.3af/802.3at devices powered
    • Supports PoE power up to 36 watts for each PoE port
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100m
    • PoE management features
    • – Total PoE power budget control
      – Per port PoE function enable/disable
      – PoE admin-mode control
      – PoE port power feeding priority
      – Per PoE port power limit
      – PD classification detection
    • Intelligent PoE features
    • – Temperature threshold control
      – PoE usage threshold control
      – PD alive check
      – PoE schedule

    Industrial Case & Installation

    • IP30 aluminum case protection
    • DIN rail and wall-mount design
    • 48~56V DC, redundant power with polarity reverse protect function
    • Supports 6000V DC Ethernet ESD protection
    • -40 to 75 degrees C operating temperature

    Digital Input & Digital Output

    • 2 Digital Input (DI)
    • 2 Digital Output (DO)
    • Integrate sensors into auto alarm system
    • Transfer alarm to IP network via email and SNMP trap

    Layer 2 Features

    • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
    • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Storm Control support
    • – Broadcast/Multicast/Unicast
    • Supports VLAN
    • – IEEE 802.1Q tagged VLAN
      – Up to 255 VLANs groups, out of 4094 VLAN IDs
      – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
      – Private VLAN Edge (PVE)
      – Protocol-based VLAN
      – MAC-based VLAN
      – Voice VLAN
    • Supports Spanning Tree Protocol
    • – IEEE 802.1D Spanning Tree Protocol (STP)
      – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
      – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
      – BPDU Guard
    • Supports Link Aggregation
    • – 802.3ad Link Aggregation Control Protocol (LACP)
      – Cisco ether-channel (static trunk)
      – Maximum 10 trunk groups with 4 ports per trunk group
      – Up to 8Gbps bandwidth (duplex mode)
    • Provides port mirror (1-to-1)
    • Port mirroring to monitor the incoming or outgoing traffic on a particular port
    • Loop protection to avoid broadcast loops
    • Supports ERPS (Ethernet Ring Protection Switching)

    Layer 3 IP Routing Features

    • Supports maximum 32 software static routes and route summarization

    Quality of Service

    • Ingress Shaper and Egress Rate Limit per port bandwidth control
    • 8 priority queues on all switch ports
    • Traffic classification
    • – IEEE 802.1p CoS
      – IP TOS/DSCP/IP precedence
      – IP TCP/UDP port number
      – Typical network application
    • Strict priority and Weighted Round Robin (WRR) CoS policies
    • Supports QoS and In/Out bandwidth control on each port
    • Traffic-policing policies on the switch port
    • DSCP remarking

    Multicast

    • Supports IGMP snooping v1, v2 and v3
    • Supports MLD snooping v1 and v2
    • Querier mode support
    • IGMP snooping port filtering
    • MLD snooping port filtering
    • MVR (Multicast VLAN Registration)

    Security

    • IEEE 802.1x Port-based/MAC-based network access authentication
    • Built-in RADIUS client to cooperate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS/TACACS+ users access authentication
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
    • Source MAC/IP address binding
    • DHCP snooping to filter distrusted DHCP messages
    • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
    • IP Source Guard prevents IP spoofing attacks
    • IP address access management to prevent unauthorized intruder

    Management

    • Switch Management Interfaces
    • – Console/Telnet Command Line Interface
      – Web switch management
      – SNMP v1 and v2c switch management
      – SSH/SSL and SNMP v3 secure access
    • Four RMON groups (history, statistics, alarms, and events)
    • IPv6 IP address/NTP/DNS management
    • Built-in Trivial File Transfer Protocol (TFTP) client
    • BOOTP and DHCP for IP address assignment
    • Firmware upload/download via HTTP/TFTP
    • DHCP Relay
    • DHCP Option 82
    • User Privilege levels control
    • Network Time Protocol (NTP)
    • Link Layer Discovery Protocol (LLDP)
    • SFP-DDM (Digital Diagnostic Monitor)
    • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
    • Reset button for system reboot or reset to factory default
    • PLANET Smart Discovery Utility for deployment management
     
  • Specifications
  • Hardware Specifications
    Copper Ports 18 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000BASE-SX/LX/BX SFP interfaces (Port-19 and Port-20)
    Compatible with 100BASE-FX SFP
    PoE Injector Port 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
    Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 40Gbps/non-blocking
    Throughput (packet per second) 29.7Mpps@ 64Bytes packet
    Address Table 8K entries, automatic source address learning and aging
    Shared Data Buffer 4Mbits
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 sec: System reboot
    > 5 sec: Factory default
    ESD Protection 6KV DC
    Enclosure IP30 aluminum case
    Installation DIN rail kit and wall-mount kit
    Connector Removable 6-pin terminal block for power input
    Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
    Removable 6-pin terminal block for DI/DO interface
    Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
    Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V
    DI/DO 2 Digital Input (DI):
    Level 0: -24V~2.1V (±0.1V)
    Level 1: 2.1V~24V (±0.1V)
    Input Load to 24V DC, 10mA max.
    2 Digital Output (DO): Open collector to 24V DC, 100mA max.
    LED Indicator System:
    Power 1 (Green)
    Power 2 (Green)
    Fault Alarm (Green)
    Ring (Green)
    Ring Owner (Green)
    Per 10/100/1000T RJ45 PoE+ Ports:
    PoE-in-Use (Orange)
    LNK/ACT (Green)
    Per 10/100/1000T RJ45Ports:
    1000 LNK/ACT (Orange)
    100 LNK/ACT (Green)
    Per SFP Interface:
    1000 LNK/ACT (Orange)
    100 LNK/ACT (Green)
    Dimensions (W x D x H) 152 x 107x 84 mm
    Weight 1533g
    Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended)
    Power Consumption 11.1 watts/37.87BTU (Power on without any connection)
    349 watts/119.08BTU (Full loading with PoE function)
    Power Over Ethernet
    PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
    PoE Power Supply Type End-span
    PoE Power Output IEEE 802.3af Standard
    – Per port 48V~51V DC (depending on the power supply), max. 15.4 watts

    IEEE 802.3at Standard
    – Per port 51V~56V DC (depending on the power supply), max. 36 watts

    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 48V Power input
    – 240W maximum (depending on power input)

    56V Power input
    – Single power input: 260W maximum (depending on power input)
    – Dual power input: 320W maximum (depending on power input)

    Max. number of Class 2 PDs 16
    Max. number of Class 3 PDs 16
    Max. number of Class 4 PDs 10
    Layer 2 Function
    Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable/enable
    Power saving mode control
    Port Status Display each port’s speed duplex mode, link status, flow control status,
    auto negotiation status, trunk status
    Port Mirroring TX/RX/both
    1 to 1 monitor
    VLAN 802.1Q tagged based VLAN, up to 255 VLAN groups
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP/static trunk
    Supports 10 trunk groups with 4 ports per trunk group
    QoS Traffic classification based, strict priority and WRR
    8-level priority for switching
    – Port number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP packet
    IGMP Snooping IGMP (v1/v2/V3) snooping, up to 255 multicast groups
    IGMP querier mode support
    MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groups
    MLD querier mode support
    Access Control List IP-based ACL/MAC-based ACL
    Up to 123 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 500Kb~1000Mbps
    Egress: 500Kb~1000Mbps
    SNMP MIBs RFC-1213 MIB-II
    IF-MIB
    RFC-1493 Bridge MIB
    RFC-1643 Ethernet MIB
    RFC-2863 Interface MIB
    RFC-2665 Ether-Like MIB
    RFC-2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC-2737 Entity MIB
    RFC-2618 RADIUS Client MIB
    RFC-2933 IGMP-STD-MIB
    RFC3411 SNMP-Frameworks-MIB
    IEEE 802.1X PAE
    LLDP
    MAU-MIB
    Layer 3 Function
    IP Interfaces Max. 8 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 software static routing
    IPv6 software static routing
    Standards Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Stability Testing IEC60068-2-32 (free fall)
    IEC60068-2-27 (shock)
    IEC60068-2-6 (vibration)
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1x Port Authentication Network Control
    IEEE 802.1ab LLDP
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP v1
    RFC 2236 IGMP v2
    Environment
    Operating Temperature -40 ~ 75 degrees C
    Storage Temperature -40 ~ 85 degrees C
    Humidity 5 ~ 95% (non-condensing)
  • Downloads

  • Quick Guide

    Date Version Description Download
    2016-03-31 1.0 Initial release.
    Ordering Information
    IGS-20160HPT Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/100T + 2-Port 100/1000X SFP Managed Switch (-40~75 degrees C)