Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

FGSD-1022HP

8-Port 10/100Mbps + 2G TP / SFP Combo Managed 802.3at PoE Switch

FGSD-1022HP

FGSD-1022HP

8-Port 10/100Mbps + 2G TP / SFP Combo Managed 802.3at PoE Switch

STATUS: By Order
WARRANTY: 3 years

2icon_30W_PoE5icon_802_3af_end2icon_802.1Q_VLAN0icon_qosicon_snmp

  • Overview
  • High Power PoE for Security and Public Service PoE Applications

    PLANET FGSD-1022HP, the next generation Managed PoE Switch, features IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combine up to 30-watt power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) wireless LAN access points and other network devices by providing double PoE power, more than conventional 802.3af PoE currently.

    Flexible and Centralized Power Management

    The 8 PoE ports in the FGSD-1022HP support both 802.3af and 802.3at PoE standards and allows users to flexibly connect standard and high powered devices simultaneously. By offering 150-watt PoE budget, eight 15.4 watt IEEE 802.3af devices or five 30-watts IEEE 802.3at devices, it can be easily installed without the power-socket limitation. 

    To facilitate power management, the FGSD-1022HP comes with powerful PoE management features such as over temperature protection, usage threshold alert and auto power allocation to prevent power budget overloading. The PoE power budget can be allocated by priorities or classification and sent alert event logs when power usage reaches the defined threshold. The FGSD-1022HP enables centralization of the power supply and optimizes the installation and power management of remote network devices; therefore, it eliminates costs for additional AC wiring and reduces installation time.

    IEEE 802.3at Power over Ethernet Pre-Standard Compliant

    Till today, the IEEE 802.3af Power over Ethernet Standard has become popular yet the PoE demand still grows for increasing network-powered applications. With many critical applications appearing, the IEEE 802.3af PoE standard may not afford the trend of higher power demand. Hence, the IEEE 802.3at Power over Ethernet pre-standard is defined to allow delivery of maximum up to 30-watts input power to each PoE device. The IEEE 802.3at Power over Ethernet pre-standard is an ideal solution to fulfillinq the high power requirements directly via the RJ-45 Port interface. Compliant with IEEE 802.3at, the FGSD-1022HP possesses stronger power capability than the existing 802.3af PoE Switch.

    Full-Functioned / Robust Layer 2 Features

    The FGSD-1022HP can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree protocol, QoS, bandwidth control and IGMP snooping. It provides IEEE 802.1Q Tagged VLAN and the VLAN groups allowed on the FGSD-1022HP will be maximally up to 256. Via aggregation of supporting port, the FGSD-1022HP allows the operation of high-speed trunk to combine with multiple ports and supports fail-over as well. In addition, SNTP, System log and Remote syslog provide alarm event record to the administrator for security monitoring.

    Excellent Traffic Control

    PLANET FGSD-1022HP is loaded with powerful traffic management and QoS features to enhance services offered by service providers. The functionality includes QoS features such as wire-speed Layer 4 traffic classifiers and bandwidth limiting applications that are particular useful for multi-tenant unit, multi-business unit, Telco, or network service provider. It also empowers the enterprises to take full advantages of the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission.

    Powerful Management and Easy To Use

    For efficient management, the FGSD-1022HP is equipped with console, WEB and SNMP management interfaces. With its built-in Web-based management interface, the FGSD-1022HP offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the FGSD-1022HP can be accessed via Telnet and the console port. It supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. Moreover, the FGSD-1022HP offers secure remote management by supporting SNMPv3 and SSL connection which encrypts the packet content at each session.

    Powerful Security

    PLANET FGSD-1022HP offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises Port-based IEEE 802.1x user and device authentication. The Port-security is effective in limiting the number of clients passing through so that network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

    Flexibility and Extension Solution

    The two mini-GBIC slots are compatible with 1000Base-SX/LX and WDM SFP (Small Form Factor Pluggable) fiber-optic modules. The distance can be extended from 550 meters (Multi-Mode fiber cable) up to 10/30/50/70/120 kilometers (Single-Mode fiber or WDM fiber cable). They are well suited for applications within the enterprises data centers, distributions or remote PoE equipments data link.

     
  • Applications
  • Train Station – IEEE 802.3at Compliant IP Surveillance and Wireless Powered Devices 

    Having the capability of IEEE 802.3at Power over Ethernet pre-standard, the FGSD-1022HP can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Besides the wired Internet network, the wireless LAN would be more efficient for the transportation station to provide high-speed and wide area Internet services for travelers. By adopting PoE Wireless LAN structure, the transportation authority gains benefit from less cost while providing better Internet services in wider areas for the travelers. 

     
     
    IP Office

    With the business office expansion, the additional telephones required can be installed at less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET FGSD-1022HP PoE Managed Switch helps enterprises to create an integrated data, voice, and powered network. PLANET IEEE 802.3af compliant IP Phones can be installed without the need of an additional power cable because the power can be provided via the standard Ethernet cable from the connected FGSD-1022HP. PoE IP phones and analog Telephony adapter work perfectly with the FGSD-1022HP which injects power through the Ethernet cables. 

    With the FGSD-1022HP, IP Telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP Telephony communications infrastructure. 

     
     
  • Key Features
  • Physical Port

    • 8-Port 10/100TX Fast Ethernet ports with IEEE 802.3af PoE injector
    • 2 10/100/1000T TP combo interfaces
    • 2 mini-GBIC/SFP slots, shared with Port-9 and Port-10
    • Reset button for system management
    • 1 RS-232 male DB9 console interface for Switch basic management and setup

    Power over Ethernet

    • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
    • Up to 8 IEEE 802.3af devices powered,supporting PoE Power up to 15.4 watts for each PoE port
    • Up to 5 IEEE 802.3at devices powered,supporting PoE Power up to 30 watts for each PoE port
    • Supports PoE Power up to 15.4 watts for each PoE port
    • Auto detect powered device (PD)
    • Circuit protection prevent power interference between each port
    • Remote power feeding up to 100m
    • PoE Management
      • IEEE 802.3af and IEEE 802.3at mode Switch control
      • Total PoE power budget control
      • Per port PoE function enable/disable
      • PoE Admin-mode control
      • PoE Port Power feeding priority
      • Per PoE port power limit
      • PD classification detection
      • Over Temperature Protection function
      • Temperature Threshold Control
      • PoE Usage Threshold Control

    Layer 2 Features

    • Prevents packet loss flow control
      • IEEE 802.3x pause frame flow control for full-duplex mode
      • Back-Pressure Flow Control in half-duplex mode
    • High performance of Store-and-Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Broadcast / Multicast / Unicast storm control
    • 8K MAC address table, automatic source address learning and ageing
    • Supports VLAN
      • IEEE 802.1Q Tag-based VLAN
      • Port-Based VLAN
      • Q-in-Q tunneling
      • GVRP for dynamic VLAN Management
      • Private VLAN Edge (PVE / Protected Port )
    • Supports Link Aggregation
      • up to 13 trunk groups
      • up to 8 ports per trunk group with 1.6Gbps bandwidth (full duplex Mode)
      • IEEE 802.3ad LACP (Link Aggregation Control Protocol)
      • Cisco ether-channel (Static Trunk)
    • Spanning Tree Protocol
      • STP, IEEE 802.1D (Classic Spanning Tree Protocol)
      • MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
    • Port Mirroring to monitor the incoming or outgoing traffic on a particular port

    Quality of Service

    • 4 priority queues on all Switch ports
    • Traffic classification
      • IEEE 802.1p CoS
      • IP TOS / DSCP to 802.1p priority mapping
      • Port-Based priority
    • Strict priority and Weighted Round Robin (WRR) CoS policies
    • Supports QoS and In/Out bandwidth control on each port
    • Voice QoS by application source / destination protocol

    Multicast

    • Supports IGMP Snooping v1 and v2
    • IGMP Snooping v2 fast leave
    • Querier mode support

    Security

    • IEEE 802.1x Port-based network access control protocol
    • RADIUS users access authentication
    • L3 / L4 Access Control List (ACL)
    • Source IP-MAC / Port-Binding
    • Port Security for Source MAC address entries filtering

    Management

    • Switch Management Interface
      • Telnet Command Line Interface
      • Web switch management
      • SNMP v1, v2c, v3 switch management
      • SSL secure management
    • Three user privilege levels control (Admin, Operator, viewer)
    • DHCP client for IP address assignment
    • DHCP Option82 and DHCP Relay
    • Link Layer Discovery Protocol (LLDP) for easy network management
    • Built-in Trivial File Transfer Protocol (TFTP) client
    • Firmware upgrade via TFTP or HTTP
    • Configuration restore / backup via TFTP or HTTP
    • Event message logging to local file or remote Syslog server
    • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
    • SNMP trap for interface Link Up and Link Down notification
    • Supports Ping function
    • Supports Simple Network Protocol (SNTP)
     
  • Specifications
  • Hardware Specification
    Hardware Version 2
    10/100Mbps Copper Ports 8 10/ 100Base-TX RJ-45 auto-MDI/MDI-X ports
    1000Mbps Copper Ports 2 10/100/1000Mbps RJ-45 auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000Base-SX/LX/BX, shared with Port-9~Port-10
    Switch Architecture Store-and-Forward
    Switch Fabric 5.6Gbps / non-blocking
    Switch Throughput 4.16Mpps @64Bytes
    Address Table 8K entries
    Share Data Buffer 2 Mbits
    Maximum Frame Size 9K Bytes
    Flow Control Back pressure for half-duplex
    IEEE 802.3x pause frame for full-duplex
    LED System: Power
    10/100 PoE Port : Link/Activity (Green), PoE In-Use (Amber)
    Gigabit Port: 1000 LNK / ACT(Green), 10/100 LNK / ACT(Amber)
    Reset Button < 5 secs: System reboot > 10 secs: Factory default
    Dimensions (W x D x H) 330 x 155 x 43.5 mm
    Weight 1.74Kg
    Power Input 100 – 240VAC, 50 – 60Hz, auto-sensing
    Power Consumption 200W / 686.2BTU
    Power over Ethernet
    PoE Standard IEEE 802.3af / IEEE 802.3at Power over Ethernet / PSE
    PoE Power Supply Type End-Span
    PoE Power Output Per Port 56V DC, 350mA . max. 15.4 watts (IEEE 802.3af)
    Per Port 56V DC, 590mA. max. 30 watts (IEEE 802.3at)
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 150 watts
    Max. number of Class 2 PD 8
    Max. number of Class 3 PD 8
    Max. number of Class 4 PD 5
    Layer 2 Function
    Management Interface Console, Telnet, Web Browser, SSL, SNMPv1, v2c, v3
    Port Configuration Port disable/enable
    Auto-negotiation
    10/100/1000Mbps full and half duplex mode selection
    Flow Control disable / enable
    Port Description
    Port Status Display each port’s speed duplex mode, link status and flow control status
    Auto negotiation status, trunk status
    Port Mirroring TX / RX / Both
    1 to 1 monitor
    Bandwidth Control Ingress / Egress Rate Control
    •Allow to configure per 128Kbps
    VLAN IEEE 802.1Q Tag-based VLAN, up to 255 VLANs groups, out of 4041 VLAN IDs
    Port-based VLAN
    Q-in-Q tunneling
    GVRP for VLAN Management, up to 128 dynamic VLAN entries
    Private VLAN Edge (PVE / Protected port) with two protected port groups
    Link Aggregation Static Port Trunk
    IEEE 802.3ad LACP (Link Aggregation Control Protocol)
    13 groups of 8-port trunk support
    QoS 4 priority queues
    Traffic classification based on:
    -Port priority
    -802.1p priority
    -DSCP/TOS field in IP Packet
    IGMP Snooping IGMP (v1/v2) Snooping, up to 256 multicast Groups
    Access Control List IP-based Layer 3 / Layer 4 ACL
    Up to 200 ACL rule entries
    SNMP MIBs RFC-1213 MIB-II
    RFC-2863 Interface MIB
    RFC-2665 EtherLike MIB
    RFC-1493 Bridge MIB
    RFC-2819 RMON MIB (Group 1, 2, 3,9)
    POWER-ETHERNET-MIB
    Standards Conformance
    Standards Compliance IEEE 802.3: 10Base-T
    IEEE 802.3u: 100Base-TX
    IEEE 802.3z: 1000Base-SX/LX
    IEEE 802.3ab: 1000Base-T
    IEEE 802.3x: Flow Control and Back Pressure
    IEEE 802.3ad: Port trunk with LACP
    IEEE 802.1D: Spanning Tree Protocol
    IEEE 802.1s: Multiple Spanning Tree Protocol
    IEEE 802.1p: Class of Service
    IEEE 802.1Q: VLAN Tagging
    IEEE 802.1x: Port Authentication Network Control
    IEEE 802.3af: Power over Ethernet
    IEEE 802.3at: Power over Ethernet Plus
    RFC 768: UDP
    RFC 783: TFTP
    RFC 791: IP
    RFC 792: ICMP
    RFC 854: Telnet
    RFC 2068: HTTP
    RFC 1112: IGMP version 1
    RFC 2236: IGMP version 2
    RFC 1157: SNMPv1
    RFC 1902: SNMPv2c
    RFC 1305: NTP
    RFC 2138: RADIUS
    RFC 2576: SNMPv3
    RFC 5424: Syslog
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 20 ~ 95%
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
  • Download
  • Datasheet

    Date Version Description Download
    2014-02-27 1.0 FGSD-1022HP


    Firmware

    Date Version Description Download
    2012-09-07 2.0 Release for Hardware Version 2.0.


    Quick Guide

    Date Version Description Download
    2012-09-07 2.0 Release for FGSD-1022HP hardware version 2.0.
    2010-09-01 1.0 Initial Release


    User’s Manual

    Date Version Description Download
    2012-09-07 2.0 Release for FGSD-1022HP hardware version 2.0.
    2010-09-01 1.1 Initial Release for add FGSD-1022HP.


    EC Declaration

    Date Version Description Download
    2010-09-01 1.0 Initial Release
  • Related Products
  • Photo Model Description
    ICA-2200 Full HD PoE Box IP Camera
    ICA-2500 5 Mega-pixel PoE Box IP Camera
    ICA-5350V 3 Mega-pixel Vandalproof IR IP Camera
    ICA-HM127 3 Mega-pixel H.264 Box IP Camera
    ICA-HM131 H.264 Full-HD Fixed Dome IP Camera
    ICA-HM132 H.264 2 Mega-pixel 20M IR Vari-focal Dome IP Camera
    ICA-HM136 H.264 2 Mega-pixel 20M IR Vandalproof Dome IP Camera
    ICA-HM312 2 Mega-pixel 25M IR Outdoor Bullet PoE IP Camera
    ICA-HM351 2 Mega-pixel 35M IR Outdoor Box PoE IP Camera
    ICA-HM620 2 Mega-pixel PoE Plus Speed Dome Internet Camera
    ICF-1700 Touch Screen Internet Multimedia Phone
    MGB-Series Transceiver 1000Base-SX/LX SFP Transceiver
    POE-152S IEEE 802.3af Power over Ethernet Splitter
    POE-162S IEEE 802.3at Gigabit High Power over Ethernet Splitter
    POE-E101 IEEE 802.3af Power over Ethernet Extender
    POE-E201 IEEE 802.3at Power over Gigabit Ethernet Extender
    WNAP-1120PE 802.11n Wireless Access Point with PoE
    WNAP-C3220 300Mbps 802.11n Wireless Ceiling Mount Range Extender
    Ordering Information
    FGSD-1022HP 8-Port 10/100Mbps + 2 Gigabit TP / SFP combo Managed 802.3at PoE Switch