VC-2400MR / VC-2400MR48
24-Port VDSL2 + 2-Port Gigabit TP/SFP Combo Managed Switch
STATUS: By Order
WARRANTY: 3 years
Last Mile of FTTx Deployment The VC-2400MR Series provides up to 100/100Mbps symmetric data rate within 300m and in long range connections; it provides ultra-high performance to the pervasive telephone line network. With the two built-in mini-GBIC 1000Base-SX/LX SFP (Small Factor Pluggable) interfaces, the VC-2400MR Series can be deployed from within 550 meters (Multi-mode fiber) up to above 10/50/70/120 kilometers (Single-mode fiber). The various distances of SFP (small-form factor) and Bidi (WDM) transceivers are optional for customers. The long distance support feature makes the VC-2400MR series a great and ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Home) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / telecom / service provider’s fiber node to the buildings and customers’ home. |
MTU / MDU / Hospitality Solution IPTV, VOD and digital message broadcasting services are the worldwide hot trends, and more and more service providers have gradually upgraded the client side devices from analog system to digital system. PLANET VC-2400MR series VDSL2 CO Switch and VC-23x VDSL2 CPEs are the best solutions to quickly providing cost-effective and high speed network services by utilizing the existing telephone wire infrastructure. IP network installation is straightforward and requires no new wiring. With enough bandwidth, the 100/100Mbps symmetric capability of the VC-2400MR series enables many Multi-Media services on local Internet to become true, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, distance education, and so on. The VC-2400MR series provides excellent bandwidth to satisfy the triple play devices for entertainment and communication. Meanwhile, this kind of infrastructure will minimize the burden on the Internet. |
VDSL Interface
Ethernet Interface
VDSL2 Features
Layer 2 Features
Quality of Service
Multicast
Security
Management
Redundant Power System
|
Hardware Specifications | |
VDSL Interface | VC-2400MR: 24-Port VDSL2 Line via 1 RJ-21 (Telco-50) connector VC-2400MR48: 24-Port POTS/Telephone via 1 RJ-21 (Telco-50)connector |
1000Mbps Copper Ports | 2 10/100/1000Mbps RJ-45 auto-negotiation, auto MDI/MDI-X |
SFP/Mini-GBIC Slots | 2 1000Base-SX/LX/BX, shared with Port-25~Port-26 |
Console | 1 x RS-232 Serial Port (DB9, 57600, N, 8, 1) |
Surge Protect | 3KV |
Switch Architecture | Store-and-Forward |
Switch Fabric | 8.8Gbps / non-blocking |
Switch Throughput | 6.547Mpps @64Bytes |
Address Table | 8K entries |
Share Data Buffer | 512Kbytes |
Maximum Frame Size | 9K Bytes |
Flow Control | Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex |
LED | System: Power, SYS Status Alert: FAN 1, FAN 2, Power 1, Power 2 VDSL: VDSL Link/Sync. Gigabit Port: 1000 Link/Active, 100 Link/Active |
Reset Button | < 5 sec: System reboot > 10 sec: Factory Default |
Dimensions (W x D x H) | 440 x 300 x 44 mm, 2U height |
Weight | 6.4kg |
Power Requirements | AC Input VC-2400MR: 100~240V AC, 50-60 Hz VC-2400MR48: Optional AC Power module DC Input |
Power Consumption / Dissipation / Dissipation | 130 watts maximum / 404 BTU/hr maximum |
Other | Reset button for system reset and reset to factory default |
VDSL2 | |
VDSL2 Standard | Complies with ITU-T G.993.1 and G.993.2. Supports provisioning the VDSL optional band (25K to 138K Hz) usage |
Band Plan | Selectable band plan for each VDSL line on a per port basis Band plan A: – Profile 998, Annex A of G.993.1; Optimized for symmetric services Band plan B: – Profile 997, Annex B of G.993.1 ; Optimized for asymmetric services |
Profile | Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, and 30a for frequency bands (Annex A, B and C) defined in G.993.2Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, and 30a for frequency bands (Annex A, B and C) defined in G.993.2 |
Encoding | VDSL-DMT |
Layer 2 Function | |
Management Interface | Console, Telnet, Web Browser, SSL, SNMPv1 / v2c / v3 |
Gigabit Port Configuration | Port disable / enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable |
Port Mirroring | TX / RX / Both 1 to 1 monitor |
Bandwidth Control | Ingress / Egress rate limit control Gigabit Port: • Allow to configure per 128Kbps VDSL2 Port: • Allow to configure per 5Mbps |
VLAN | IEEE 802.1Q Tag-based VLAN, up to 256 VLANs groups, out of 4041 VLAN IDs Port-based VLAN GVRP, up to 128 dynamic VLAN groups Q-in-Q tunneling Private VLAN Edge(PVE / Protected port) with two protected port groups |
Link Aggregation | Static Port Trunk IEEE 802.3ad LACP (Link Aggregation Control Protocol) Supports 13 groups of 8-Port trunk support |
QoS | 4 priority queue Traffic classification based on – Port priority – 802.1p priority – DSCP/TOS field in IP Packet VoIP QoS by application protocol no. |
IGMP Snooping | IGMP (v1/v2) Snooping, up to 256 multicast Groups |
Access Control List | IP-based Layer 3 / Layer 4 ACL Up to 220 ACL rule entries |
Security | Port Security (Disable Per Port of MAC Address Learning ) Static MAC, MAC Filter, IP/MAC Binding |
SNMP MIBs | RFC-1213 MIB-II RFC-2863 Interface MIB RFC-2665 EtherLike MIB RFC-1493 Bridge MIB RFC-2819 RMON MIB (Group 1, 2, 3,9) RFC-2737 Entity MIB RFC 5650 VDSL2 MIB |
Standards Conformance | |
Regulation Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3: 10Base-T IEEE 802.3u: 100Base-TX IEEE 802.3z: 1000Base- SX/LX IEEE 802.3ab: 1000Base-T IEEE 802.3x: Flow Control and Back pressure IEEE 802.3ad: Port trunk with LACP IEEE 802.1D: Spanning tree protocol IEEE 802.1s: Multiple Spanning tree protocol IEEE 802.1p: Class of service IEEE 802.1Q: VLAN tagging IEEE 802.1x: Port authentication network control ITU-T: G.993.1 (VDSL) G.997.1 G.993.2 VDSL2 (Profile 30a Support), Annex A RFC 768: UDP RFC 793: TFTP RFC 791: IP RFC 792: ICMP RFC 2068: HTTP RFC 1112: IGMP version 1 RFC 2236: IGMP version 2 |
Cables | • VDSL2: twisted-pair telephone wires (AWG24 or better) up to 1.4km • 10/100Base-TX: 2-Pair UTP Cat.5, up to 100m (328ft) • 1000Base-T: 4-pair UTP Cat.5E, up to 100m • 1000Base-SX: 50/125µm and 62.5/125µm fiber-optic cable, up to 550m • 1000Base-LX: 9/125µm fiber optic cable, up to 10km 50/125µm and 62.5/125µm fiber-optic cable, up to 550m |
Environment | |
Temperature | 0~40 degrees C |
Humidity | 5~95% (non-condensing) |
Photo | Model | Description |
![]() |
MGB-Series Transceiver | 1000Base-SX/LX SFP Transceiver |
![]() |
VC-231 | Ethernet over VDSL2 Converter (Profile 30a) |
![]() |
VC-234 | 4-Port Ethernet over VDSL2 Bridge (Profile 30a) |
Ordering Information | |
VC-2400MR | 24-Port VDSL2 + 2G TP/SFP Managed Switch |
VC-2400MR48 | 24-Port VDSL2 + 2G TP/SFP Managed Switch w/ -48VDC Redundant power AC0 |
VC-RPS48 | VC-2400MR Redundant Power Supply, 48V DC |
VC-RPS200 | VC-2400MR Redundant Power Supply,100-240VAC / 200W |