Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

WGSD-10020HP

WGSD-10020HP

L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch

  • Overview
  • Centralized Power Management for Gigabit Ethernet Networking
    To fulfill the demand of higher power required PoE network applications with Gigabit speed transmission, PLANET has launched a new desktop 13-inch size Gigabit Managed Switch, WGSD-10020HP, which features high-performance Gigabit IEEE 802.3at PoE Plus on all copper ports. A maximum of 30 watts is available on each Gigabit copper port of the WGSD-10020HP for powering each PD, with a maximum PoE delivery of 150 watts for all PoE ports in order to satisfy the increasing needs of power consumption by PDs. Providing Gigabit throughput and high power supply, the WGSD-10020HP optimizes the installation and power management of network devices such as 11n wireless access points (APs) with Gigabit PoE LAN port, security PTZ / Speed Dome network video camera, color touch-screen PoE video phones, thin-clients and more.
    Built-in Unique PoE Functions for Powered Devices Management
    As a managed PoE Switch for surveillance, wireless and VoIP network, the WGSD-10020HP features special PoE management functions:
    ■ PD Alive Check
    ■ Scheduled Power Recycling
    ■ SMTP/SNMP Trap Event Alert
    ■ PoE Schedule

    Intelligent Powered Device Alive Check
    The WGSD-10020HP PoE Gigabit Managed Switch can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and responding, the WGSD-10020HP will recycle the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce administrator management burden.

    PoE Schedule for Energy Saving
    Under the trend of energy saving worldwide and contributing to environment protection on the Earth, the WGSD-10020HP can effectively control the power supply along with its capability of giving high watts power over Ethernet. The “PoE schedule” function enables you to activate or inactivate PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and money.
    Solution for IPv6 Networking
    By supporting IPv6 / IPv4 dual stack and plenty of management functions with easy and friendly management interfaces, the WGSD-10020HP is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment but not necessary to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

    IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
    To help customers stay on top of their businesses, the WGSD-10020HP not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 Software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.

    Robust Layer 2 Features
    The WGSD-10020HP can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control andIGMP/MLD snooping. The WGSD-10020HP allows the operation of a high-speed trunk combining multiple ports.It enables you to configure up to 5 ports as a trunk group (a maximum of 5 trunk groups are available), and supports connection fail-over as well.

    Powerful Security
    The WGSD-10020HP offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based user and device authentication.

    Enhanced Security and Traffic Control
    The WGSD-10020HP also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly-secured corporate networks with considerably less time and effort than before.

    User-friendly Secure Management
    For efficient management, the WGSD-10020HP managed switch series is equipped with console, Web and SNMP management interfaces. With the built-in web-based management interface, the WGSD-10020HP offers an easy-to-use, platform independent management and configuration facility. The WGSD-10020HP supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. For reducing product learning time, the WGSD-10020HP offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the WGSD-10020HP offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can be encrypted the packet content at each session.

    Flexible and Extendable Solution
    The two mini-GBIC SFP slots built in the WGSD-10020HP support dual speed as it features 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

    Intelligent SFP Diagnosis Mechanism
    The WGSD-10020HP supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

     

  • Applications
  • High Power IP Surveillance and Wireless LAN Service in Public Transportation

    Applying the capability of IEEE 802.3at Power over Ethernet standard, the WGSD-10020HP can directly connect with any IEEE 802.3at end-node like PTZ (Pan, Tilt & Zoom) network cameras, Speed Dome IP cameras, color touch- screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Besides the wired Internet network, the WGSD-10020HP enables the wireless LAN deployment to be more efficient in the transportation stations to bring high-speed Internet services in wide areas. By adopting PoE Wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers.

    VoIP Network in IP Office

    With the business office expansion, the additional telephones required could be installed at less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET WGSD-10020HP 802.3at Desktop PoE Switch, which is backward compatible with 802.3af, helps enterprises to create an integrated data, voice, and powered network. PLANET 802.3af / 802.3at compliant IP phones and analog telephony adapter can be installed without any additional power cable because the power can be provided via the standard Ethernet cable from the connected WGSD-10020HP. With the WGSD-10020HP, IP telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.

  • Key Features
  • Physical Port

    • 8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 with IEEE 802.3af / 802.3at PoE Injector
    • 2 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
    • RS-232 DB9 console interface for basic management and setup

    Power over Ethernet

    • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
    • Complies with IEEE 802.3at high-power Power over Ethernet End-Span PSE
    • Up to 8 ports for IEEE 802.3af / 802.3at devices powered
    • Supports PoE Power up to 30.8 watts for each PoE port
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100m
    • PoE Management
    • Total PoE power budget control
    • Per port PoE function enable / disable
    • Pert port PoE function enable / disable
    • PoE Port Power feeding priority
    • Per PoE port power limit
    • PD classification detection
    • PD Alive check

    Layer 2 Features

    • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
    • High performance of Store-and-Forward architecture and run/CRC filtering eliminate erroneous packets to optimize the network bandwidth
    • Storm Control support
      • Multicast / Unknown-Unicast / Broadcast
    • Supports VLAN
      • IEEE 802.1Q Tagged VLAN
      • Up to 256 VLANs groups, out of 4095 VLAN IDs
      • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
      • Private VLAN Edge (PVE)
      • Protocol-based VLAN
      • MAC-based VLAN
      • Voice VLAN
    • Supports Spanning Tree Protocol
      • STP, IEEE 802.1D Spanning Tree Protocol
      • RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
      • MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
      • BPDU Guard
    • Supports Link Aggregation
      • 802.3ad Link Aggregation Control Protocol (LACP)
      • Cisco ether-channel (Static Trunk)
      • Maximum 5 trunk groups, up to 10 ports per trunk group
      • Up to 20Gbps bandwidth (duplex mode)
    • Provides port mirror (many-to-1)
    • Port mirroring to monitor the incoming or outgoing traffic on a particular port

    Quality of Service

    • Ingress Shaper and Egress Rate Limit per port bandwidth control
    • 8 priority queues on all switch ports
    • Traffic classification
      • IEEE 802.1p CoS
      • IP TOS / DSCP / IP Precedence
      • IP TCP / UDP port number
      • Typical network application
    • Strict priority and Weighted Round Robin (WRR) CoS policies
    • Supports QoS and In/Out bandwidth control on each port
    • Traffic-policing policies on the switch port
    • DSCP remarking

    Multicast

    • Supports IGMP Snooping v1, v2 and v3
    • Supports MLD Snooping v1 and v2
    • Querier mode support
    • IGMP Snooping port filtering
    • MLD Snooping port filtering
    • MVR (Multicast VLAN Registration)

    Security

    • IEEE 802.1x Port-based / MAC-based network access authentication
    • Built-in RADIUS client to co-operate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS / TACACS+ users access authentication
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
    • Source MAC / IP address binding
    • DHCP Snooping to filter untrusted DHCP messages
    • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
    • IP Source Guard prevents IP spoofing attacks
    • Auto DoS rule to defend DoS attack
    • IP address access management to prevent unauthorized intruder

    Management

    • Switch Management Interfaces
      • Console / Telnet Command Line Interface
      • Web switch management
      • SNMP v1, v2c, and v3 switch management
      • SSH / SSL secure access
    • Four RMON groups (history, statistics, alarms, and events)
    • IPv6 IP Address / NTP / DNS management
    • Built-in Trivial File Transfer Protocol (TFTP) client
    • BOOTP and DHCP for IP address assignment
    • Firmware upload / download via HTTP / TFTP
    • DHCP Relay
    • DHCP Option 82
    • User privilege levels control
    • Network Time Protocol (NTP)
    • Link Layer Discovery Protocol (LLDP)
    • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
    • Reset button for system reboot or reset to factory default
    • PLANET Smart Discovery Utility for deploy management
  • Specifications
  • Hardware Specifications
    Copper Ports 8 10/ 100/1000BASE-T RJ-45 Auto-MDI/MDI-X ports
    SFP/mini-GBIC Slots 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
    Supports 100/1000Mbps dual mode and DDM
    Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1)
    Switch Architecture Store-and-Forward
    Switch Fabric 20Gbps / non-blocking
    Switch Throughput 14.88Mpps@64Bytes
    Address Table 8K entries, automatic source address learning and ageing
    Shared Data Buffer 1392 kilobytes
    ESD Protection 6KV
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Jumbo Frame 9Kbytes
    Reset Button < 5 seconds: System reboot > 5 seconds: Factory default
    Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U high
    Weight 1.8kg
    LED Power, fan alert,
    10/100/1000 Link / Act per RJ-45 port,
    100/1000 Link / Act per SFP port,
    PoE In-Use for Port-1~ 8
    Power Consumption Max. 172.9 watts / 589.6 BTU
    Power Requirements 100~240V AC, 50/60Hz
    Power over Ethernet
    PoE Standard IEEE 802.3af PoE / 802.3at PoE+ PSE
    PoE Power Supply Type End-span
    PoE Power Output Per port 56V DC, 30.8 watts (max.)
    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget 150 watts (max.)
    PoE Ability PD @ 7 Watts 8 units
    PoE Ability PD @ 15.4 Watts 8 units
    PoE Ability PD @ 30.8 Watts 4 units
    Layer 2 function
    Port Configuration Port disable / enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable / enable
    Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status
    Port Mirroring TX / RX / Both
    Many-to-1 monitor
    VLAN 802.1Q tagged based VLAN
    Q-in-Q tunneling
    Private VLAN Edge (PVE)
    MAC-based VLAN
    Protocol-based VLAN
    Voice VLAN
    IP Subnet-based VLAN
    MVR (Multicast VLAN Registration)
    Up to 255 VLAN groups, out of 4094 VLAN IDs
    Link Aggregation IEEE 802.3ad LACP / Static Trunk
    5 groups of 5-Port trunk supported
    Spanning Tree Protocol STP, IEEE 802.1D Spanning Tree Protocol
    RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
    QoS Traffic classification based, Strict priority and WRR
    8-Level priority for switching
    – Port Number
    – 802.1p priority
    – 802.1Q VLAN tag
    – DSCP/TOS field in IP packet
    IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groups
    IGMP Querier mode support
    MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groups
    MLD Querier mode support
    Access Control List IP-based ACL / MAC-based ACL
    Up to 256 entries
    Bandwidth Control Per port bandwidth control
    Ingress: 100Kbps~1000Mbps
    Egress: 100Kbps~1000Mbps
    Layer 3 Functions
    IP Interfaces Max. 8 VLAN interfaces
    Routing Table Max. 32 routing entries
    Routing Protocols IPv4 software Static Routing
    IPv6 software Static Routing
    Management
    Basic Management Interfaces Console / Telnet / Web browser / SNMP v1, v2c
    Secure Management Interfaces SSH, SSL, SNMP v3
    SNMP MIBs RFC 1213 MIB-II
    RFC 1493 Bridge MIB
    RFC 1643 Ethernet MIB
    RFC 2863 Interface MIB
    RFC 2665 Ether-Like MIB
    RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
    RFC 2737 Entity MIB
    RFC 2618 RADIUS Client MIB
    RFC 2863 IF-MIB
    RFC 2933 IGMP-STD-MIB
    RFC 3411 SNMP-Frameworks-MIB
    RFC 4292 IP Forward MIB
    RFC 4293 IP MIB
    RFC 4836 MAU-MIB
    IEEE 802.1X PAE
    LLDP
    Power over Ethernet MIB
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX/100BASE-FX
    IEEE 802.3z Gigabit SX/LX
    IEEE 802.3ab Gigabit 1000T
    IEEE 802.3x Flow Control and Back pressure
    IEEE 802.3ad Port trunk with LACP
    IEEE 802.1D Spanning Tree protocol
    IEEE 802.1w Rapid Spanning Tree protocol
    IEEE 802.1s Multiple Spanning Tree protocol
    IEEE 802.1p Class of service
    IEEE 802.1Q VLAN Tagging
    IEEE 802.1X Port Authentication Network Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP version 1
    RFC 2236 IGMP version 2
    RFC 3376 IGMP version 3
    RFC 2710 MLD version 1
    FRC 3810 MLD version 2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
    Storage Temperature: -20 ~ 70 degrees C
    Relative Humidity: 20 ~ 95% (non-condensing)
  • Downloads
  • Datasheet

    Date Version Description Download
    2014-11-28 1.0 WGSD-10020HP


    Quick Guide

    Date Version Description Download
    2014-10-31 3.1 Release for hardware version 3.0.


    User’s Manual

    Date Version Description Download
    2014-10-31 3.1 Release for hardware version 3.0.
    2014-10-03 3.0 Release for hardware version 3.0.


    EC Declaration

    Date Version Description Download
    2014-10-31 3.0 EC Declaration

     

    Ordering Information
    WGSD-10020HP 8-Port 10/100/1000Mbps PoE Plus + 2-Port 100/1000X SFP Managed Ethernet Switch