Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

SGS-6340-20S4C4X

SGS-6340-20S4C4X – NEW!

Layer 3 20-Port 100/1000X SFP + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Stackable Managed Switch

  • Overview
  • Powerful Solution for All Long-Reach Networks
    PLANET SGS-6340-20S4C4X is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance by its Layer 3 Gigabit static routing with 10Gbps uplink and multiple SFP fiber interfaces delivered in a rugged strong case. The administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the 10G network efficiently. Besides, with 128Gbps switching fabric, the SGS-6340-20S4C4X can handle extremely large amounts of data in a secure topology linking to backbone or high capacity servers for ISP and enterprise VoIP, video streaming, and multicast applications.
    AC and DC Redundant Power to Ensure Continuous Operation
    The SGS-6340-20S4C4X is equipped with one 100~240V AC power supply unit and one additional -48 ~ -60V DC power supply unit for redundant power supply installation. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. Furthermore, with the -48 ~ -60V DC power supply implemented, the SGS-6340-20S4C4X can be applied as the telecom level device.

    Layer 3 Routing Support
    The SGS-6340-20S4C4X enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The maximum number of hops allowed for the RIP is 15. The OSPF is an interior dynamic routing protocol for autonomous system based on link-state. The protocol creates a link-state database by exchanging link-states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.

    High Performance
    The SGS-6340-20S4C4X boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 56Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

    Abundant IPv6 Support
    The SGS-6340-20S4C4X provides IPv6 management and enterprise-level secure features such as SSH,ACL, WRR (Weighted Round Robin) and RADIUS authentication. The SGS-6340-20S4C4X thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.

    Excellent and Secure Traffic Control
    The SGS-6340-20S4C4X is loaded with powerful traffic management and WRR features to enhance services offered by telecoms and enterprises. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. The ACL policies supported can classify the traffic by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6340-20S4C4X also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. Thus, the SGS-6340-20S4C4X empowers ISP and enterprises to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission.

    Robust Layer 2 Features
    The SGS-6340-20S4C4X can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. It also supports 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol. The VLAN groups allowed to be on the SGS-6340-20S4C4X will be maximally up to 256. By supporting port aggregation, the SGS-6340-20S4C4X allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group.

    Efficient Management
    The SGS-6340-20S4C4X supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. For efficient management, the SGS-6340-20S4C4X Managed Gigabit Switch is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6340-20S4C4X offers an easy-to-use, platform-independent management and configuration facility. The SGS-6340-20S4C4X supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the SGS-6340-20S4C4X can be accessed via Telnet and the console port. Moreover, the SGS-6340-20S4C4X offers secure remote management by supporting SSH connection which encrypts the packet content at each session.

    Flexibility and Extension Solution
    The SGS-6340-20S4C4X provides twenty-four 100/1000Mbps dual speed SFP Fiber ports, four 1/10Gbps SFP+ Fiber ports, and four 10/100/1000Mbps TP/SFP combo ports. Each of the SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX. Therefore, the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) or up to 10/20/30/40/50/70/120 km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.

  • Applications
  • High Availability Mesh Networking Solution for Big Data System
    By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-6340-20S4C4X offers up to 128Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 10km. The SGS-6340-20S4C4X features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Multiple Spanning Tree Protocol (802.1s MSTP) into customer’s automation network to enhance system reliability and uptime. The SGS-6340-20S4C4X is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm.
    Triple Play Service of Backbone Network Solution
    In telecommunications, triple play service is a marketing term for the provisioning, over a single broadband connection of more bandwidth-intensive services, such as broadband Internet access, television and the latency-sensitive telephone. The SGS-6340-20S4C4X provides up to 128Gbps bandwidth to exchange data, voice and video packets via fiber patch cable. It’s the suitable aggregation switch for ISPs and Telcos building a heavy traffic backbone network infrastructure.
    Layer 3 VLAN Routing and 10G Uplink Application
    With the built-in robust Layer 3 routing protocols, the SGS-6340-20S4C4X ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The SGS-6340-20S4C4X, certainly an ideal solution for enterprises, offers greater security, control and bandwidth conservation, and high-speed uplink.
  • Key Features
  • Physical Ports

    • 24 100/1000BASE-X mini-GBIC/SFP slots
    • 4 10/100/1000BASE-T RJ45 copper ports, shared with port-21 to port-24
    • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP
    • RJ45 to DB9 console interface for switch basic management and setup

    IP Stacking

    • Connects with stack member via both Gigabit TP and SFP interfaces
    • Single IP address management, supporting up to 24 units stacked together

    IP Routing Features

    • Supports maximum 128 static routes and route summarization
    • Supports dynamic routing protocol: RIP and OSPF

    Layer 2 Features

      • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
      • Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
      • Auto-MDI/MDI-X detection on each RJ45 port
      • Prevents packet loss flow control

    – IEEE 802.3x pause frame flow control in full-duplex mode- Back-pressure flow control in half-duplex mode

      • High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
      • 16KC MAC address table, automatic source address learning and aging
      • Supports VLAN

    – IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management- Up to 256 VLANs groups, out of 4041 VLAN IDs- Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported- Private VLAN Edge (PVE) supported- GVRP protocol for Management VLAN- Protocol-based VLAN- MAC-based VLAN- IP subnet VLAN

      • Supports Link Aggregation

    – Maximum 128 trunk groups with up to 8 ports per trunk group- IEEE 802.3ad LACP (Link Aggregation Control Protocol)- Cisco ether-channel (static trunk)

      • Supports Spanning Tree Protocol

    – STP, IEEE 802.1D (Classic Spanning Tree Protocol)- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)- BPDU & root guard

    • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
    • Provides port mirror (many-to-1)

    Quality of Service

      • 8 priority queues on all switch ports
      • Supports strict priority and WRR (Weighted Round Robin) CoS policies
      • Traffic classification

    – IEEE 802.1p CoS/ToS- IPv4/IPv6 DSCP- Port-based WRR

    • Strict priority and WRR CoS policies

    Multicast

    • Supports IPv4 IGMP snooping v1, v2 and v3; and IPv6 MLD v1 and v2 snooping
    • Querier mode supports
    • Supports Multicast VLAN Register (MVR)

    Security

    • IEEE 802.1x port-based network access authentication
    • MAC-based network access authentication
    • Built-in RADIUS client to co-operate with the RADIUS servers for IPv4 and IPv6
    • TACACS+ login users access authentication
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
    • Supports DHCP snooping
    • Supports ARP inspection
    • IP Source Guard prevents IP spoofing attacks
    • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding

    Management

      • Management IP for IPv4 and IPv6
      • Switch Management Interface

    – Console/Telnet Command Line Interface- Web switch management- SNMP v1, v2c and v3 switch management- SSH/SSL secure access

    • BOOTP and DHCP for IP address assignment
    • Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6
    • SNTP (Simple Network Time Protocol) for IPv4 and IPv6
    • User privilege levels control
    • Syslog server for IPv4 and IPv6
    • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events)
    • Supports ping, trace route function for IPv4 and IPv6
  • Specification
  • Hardware Specifications
    Copper Ports 4 10/ 100/1000BASE-T RJ45 auto-MDI/MDI-X ports, shared with port-21 to port-24
    SFP/mini-GBIC Slots 24 100/1000BASE-X SFP interfaces
    Compatible with 100BASE-FX SFP transceiver
    SFP+ Slots 4 10GBASE-SR/LR SFP+ interface (port-25 to port-28)
    Compatible with 1000BASE-SX/LX/BX SFP transceiver
    Console 1 x RJ45-to-RS232 serial port (9600, 8, N, 1)
    Switch Architecture Store-and-forward
    Switch Fabric 128Gbps/non-blocking
    Switch Throughput 95.24Mpps
    Address Table 16K MAC address table with auto learning function
    Shared Data Buffer 1.5MB
    Flow Control Back pressure for half-duplex
    IEEE 802.3x pause frame for full-duplex
    Jumbo Frame 9KB
    LED System:
    PWR, SYS
    Ports:
    10/100/1000T RJ45 Port: LNK/ACT
    100/1000X SFP Slot: LNK/ACT
    1/10G SFP+ Slot: LNK/ACT
    Dimensions (W x D x H) 442 x 220 x 44 mm, 1U height
    Weight 2821g
    Power Consumption 54.5 watts/185.96 BTU (maximum)
    Power Requirements AC 100~240V, 50/60Hz
    DC -48 ~ -60V
    Fan 2
    Management Function
    System Configuration Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
    Management Supports both IPv4 and IPv6 addressing
    Supports the user IP security inspection for IPv4/IPv6 SNMP
    Supports MIB and TRAP
    Supports IPv4/IPv6 FTP/TFTP
    Supports IPv4/IPv6 NTP
    Supports RMON 1, 2, 3, 9 four groups
    Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password
    Supports IPv4/IPv6 SSH
    The right configuration for users to adopt RADIUS server’s shell management
    Supports CLI, console, Telnet
    Supports SNMPv1, v2c and v3
    Supports Security IP safety net management function: avoid unlawful landing at non-restrictive area
    Supports Syslog server for IPv4 and IPv6
    Supports TACACS+
    Layer 3 Function
    Routing Protocol Static routing, RIP and OSPF
    Routing Table 128
    Layer 2 Function
    Port Configuration Port disable/enable
    Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
    Flow control disable/enable
    Bandwidth control on each port
    Port loopback detect
    Port Status Display each port’s speed duplex mode, link status, flow control status and
    auto negotiation status
    VLAN 802.1Q tagged based VLAN, up to 256 VLAN groups
    802.1ad Q-in-Q (VLAN stacking)
    GVRP for VLAN management
    Private VLAN Edge (PVE) supported
    Protocol-based VLAN
    MAC-based VLAN
    IP subnet VLAN
    Bandwidth Control TX/RX/both
    Link Aggregation IEEE 802.3ad LACP/static trunk
    Supports 128 groups with 8 ports per trunk group
    QoS 8 priority queues on all switch ports
    Supports strict priority and Weighted Round Robin (WRR) CoS policies
    Traffic classification:
    – IEEE 802.1p CoS/ToS
    – IPv4/IPv6 DSCP
    – Port-based WRR
    Multicast IGMP v1/v2/v3 snooping
    Querier mode support
    MLD v1/v2 snooping
    Querier mode support
    Multicast VLAN Register (MVR)
    Access Control List Supports Standard and Expanded ACL
    IP-based ACL/MAC-based ACL
    Time-based ACL
    Up to 512 entries
    Bandwidth Control At least 64Kbps stream
    Security Supports MAC + port binding
    IPv4/IPv6 + MAC + port binding
    IPv4/IPv6 + port binding
    Supports MAC filter
    ARP scanning prevention
    Authentication IEEE 802.1x port-based network access control
    AAA authentication: TACACS+ and IPv4/IPv6 over RADIUS
    SNMP MIBs RFC 1213 MIB-II
    RFC 1215 Internet Engineering Task Force
    RFC 1271 RMON
    RFC 1354 IP-Forwarding MIB
    RFC 1493 Bridge MIB
    RFC 1643 Ether-like MIB
    RFC 1907 SNMPv2
    RFC 2011 IP/ICMP MIB
    RFC 2012 TCP MIB
    RFC 2013 UDP MIB
    RFC 2096 IP forward MIB
    RFC 2233 if MIB
    RFC 2452 TCP6 MIB
    RFC 2454 UDP6 MIB
    RFC 2465 IPv6 MIB
    RFC 2466 ICMP6 MIB
    RFC 2573 SNMPv3 notification
    RFC 2574 SNMPv3 VACM
    RFC 2674 Bridge MIB Extensions
    Standard Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T
    IEEE 802.3u 100BASE-TX
    IEEE 802.3z Gigabit 1000BASE-SX/LX
    IEEE 802.3ab Gigabit 1000BASE-T
    IEEE 802.3ae 10Gb/s Ethernet
    IEEE 802.3x flow control and back pressure
    IEEE 802.3ad port trunk with LACP
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.1w Rapid Spanning Tree Protocol
    IEEE 802.1s Multiple Spanning Tree Protocol
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN tagging
    IEEE 802.1X port authentication network control
    IEEE 802.1ab LLDP
    RFC 768 UDP
    RFC 793 TFTP
    RFC 791 IP
    RFC 792 ICMP
    RFC 2068 HTTP
    RFC 1112 IGMP v1
    RFC 2236 IGMP v2
    RFC 3376 IGMP v3
    RFC 2710 MLD v1
    FRC 3810 MLD v2
    RFC 2328 OSPF v2
    RFC 1058 RIP v1
    RFC 2453 RIP v2
    Environment
    Operating Temperature: 0 ~ 50 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 90% (non-condensing)
  • Downloads
  • Datasheet

    Date Version Description Download
    2015-08-21 1.0 SGS-6340-20S4C4X

    Quick Guide

    Date Version Description Download
    2015-08-07 1.0 Initial release.

     

    Ordering Information
    SGS-6340-20S4C4X Layer 3 20-Port 100/1000X SFP + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Stackable Managed Switch