IGS-10020PT
Industrial 8-Port 10/100/1000T 802.3af PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature
Environmentally Hardened Design The Industrial 8-Port Gigabit 802.3af PoE Switch, IGS-10020PT is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-10020PT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate in wide temperature range from -40 to 75 degrees C, the IGS-10020PT can be placed in almost any difficult environment. The IGS-10020PT also allows either DIN rail or wall mounting for efficient use of cabinet space. |
Redundant Ring, Fast Recovery for Surveillance System The IGS-10020PT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-10020PT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation. |
Built-in Unique PoE Functions for Powered Devices Management As a managed PoE Switch for surveillance, wireless and VoIP network, the IGS-10020PT features three special PoE Management functions: ■ PD ALIVE Check ■ Schedule Power Recycle ■ SMTP/SNMP Trap Event Alert ■ PoE Schedule Intelligent Alive Check for Powered Device |
PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the IGS-10020PT can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMB or Enterprise save power and money. |
Digital Input and Digital Output for external Alarm The IGS-10020PT supports Digital Input, and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect, log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-10020PT port is link down, link up or power failure. |
Robust Layer 2 Features The IGS-10020PT can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, rapid spanning tree protocol, layer 2 to layer 4 QoS, bandwidth control and IGMP/MLD snooping. The IGS-10020PT provides 802.1Q tagged VLAN and the VLAN groups allowed will be maximally up to 255. The IGS-10020PT not only allows the operation of a high-speed trunk combining multiple ports, but also supports connection fail-over. Efficient Management Powerful Security Flexibility and Extension Solution Perfect Integration Solution for Outdoor IP PoE Camera and NVR System |
Industrial Area Department / Workgroup PoE Switch Providing up to 8 PoE, in-line power interface, the IGS-10020PT can easily build a power central-controlled IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or Wireless Access Points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-10020PT makes the installation of IP cameras or Wireless AP easier and more efficient. |
Transportation – Wireless and IP Surveillance In modern times, Internet service is mostly demanded during travel times, either for business or for leisure. Besides the wired Internet network, the wireless LAN would be more efficient for the transportation station to provide high-speed and wide area Internet services for travelers. With the PoE wireless LAN APs connected to the IGS-10020PT that provides long distance fiber capability, people can experience the wireless LAN roaming service within the Wi-Fi coverage even when the transportation itself like train, bus or ship moving on the way. By adopting PoE Wireless LAN structure, the transportation authority gains benefit from costing less while providing better Internet services in wider areas for the travelers. On the other hand, the PoE IP Surveillance system deployed helps watch the transportation security and PoE IP Telephony system improves the voice communicating in the station with lower cost. |
Physical Port
Power over Ethernet
Industrial Case / Installation
Digital Input / Digital Output
Layer 2 Features
Quality of Service
Multicast
Security
Management
|
Hardware Specifications | |
Copper Ports | 8 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots | 2 1000Base-SX/LX/BX SFP interfaces (Port-9 and Port-10) Compatible with 100Base-FX SFP |
Console | 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20Gbps / non-blocking |
Throughput (packet per second) | 14.8Mpps@ 64Bytes packet |
Address Table | 8K entries, automatic source address learning and ageing |
Share Data Buffer | 4Mbits |
Flow Control | IEEE 802.3x Pause Frame for Full-Duplex Back pressure for Half-Duplex |
Jumbo Frame | 9Kbytes |
Reset Button | < 5 sec: System reboot > 10 sec: Factory Default |
ESD Protection | 6KV DC |
EFT Protection | 6KV DC |
Enclosure | IP30 Aluminum Metal Case |
Installation | DIN Rail Kit and Wall Mount Kit |
Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2; Pin 3/4 for DO 1 & 2; Pin 5/6 for GND |
Alarm | One relay output for power fail. Alarm Relay current carry ability: 1A @ DC 24V |
DI/DO | 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24VDC, 100mA max. |
LED Indicator | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Green) Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ-45 Ports: PoE In-Use (Orange) LNK/ACT (Green) Per SFP Interface: 1000 (Orange) LNK/ACT (Green) |
Dimensions (W x D x H) | 152 x 107x 72 mm |
Weight | 1684g |
Power Requirements | DC 48V |
Power Consumption | 31.9 watts / 108.78BTU (Full loading without PoE function) 161.9 watts / 522.08BTU (Full loading with PoE function) |
Power Over Ethernet | |
PoE Standard | IEEE 802.3af Power over Ethernet / PSE |
PoE Power Supply Type | End-Span |
PoE Power Output | Per Port 48V DC, 350mA . Max. 15.4 watts |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Budget | 130W maximum (depends on power input) |
Max. number of Class 2 PD | 8 |
Max. number of Class 3 PD | 8 |
Layer 2 Functions | |
Basic Management Interfaces | Console, Telnet, Web Browser, SNMP v1, v2c |
Secure Management Interfaces | SSH, SSL, SNMP v3 |
Port Configuration | Port disable/enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Power saving mode control |
Port Status | Display each port’s speed duplex mode, link status, Flow control status, Auto negotiation status, trunk status |
Port Mirroring | TX / RX / Both 1 to 1 monitor |
VLAN | 802.1Q Tagged Based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-Based VLAN Protocol-Based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP / Static Trunk Supports 5 groups of 8-Port trunk support |
QoS | Traffic classification based, Strict priority and WRR 8-Level priority for switching - Port Number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP Packet |
IGMP Snooping | IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support |
MLD Snooping | MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support |
Access Control List | IP-based ACL / MAC-based ACL Up to 123 entries |
Bandwidth Control | Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
SNMP MIBs | RFC 1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB |
Standards Conformance | |
Regulation Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) |
Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1s Multiple spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 |
Environment | |
Operating Temperature | -40 ~ 75 degrees C |
Storage Temperature | -40 ~ 85 degrees C |
Humidity | 5 ~ 95% (Non-condensing) |
|
Ordering Information | |
IGS-10020PT | Industrial 8-Port 10/100/1000T 802.3af PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature |