Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

ISW-514PS / ISW-514PS15 / ISW-514PSF

HomeHome»Products»Planet»Power over Ethernet»Industrial Power over Ethernet»ISW-514PS / ISW-514PS15 / ISW-514PSF

ISW-514PS / ISW-514PS15 / ISW-514PSF

4-Port 10/100Mbps with PoE + 1-Port 100FX Industrial Web Smart Switch

5icon_802_3af_end3icon_100FX_Fiber-Optical0WEB_Management2icon_802.1Q_VLAN3icon_Redundant_Power4icon_DIN_Rail

  • Overview
  • PLANET ISW-514PS series, a Web Management Industrial PoE Switch, is designed to transmit power and data over single Ethernet cable to remote PoE capable devices and performs intelligent PoE control, power usage monitoring and smart Layer 2 switching management in industrial harsh environments. The ISW-514PS series provides four 10/100Mbps copper ports supporting IEEE 802.3af Power over Ethernet injector and one 100Base-FX fiber optic interface delivered in an IP30 rugged strong case. Supporting up to 15.4-watt power per port for any remote IEEE 802.3af powered device (PD) such as PoE IP cameras and PoE wireless LAN access point, the ISW-514PS series is an ideal solution to deploying surveillance system and wireless service in climatically demanding wide temperature range (-10 to 60 degrees C) environments.

    IEEE 802.3af Power over Ethernet Industrial Switch

    PoE feature is more often supported in the industrial Ethernet devices for efficient operation in harsh environments. The ISW-514PS series in-line power follows standard IEEE 802.3af and able to give power to 4 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5 / 5e UTP wire. With Data and Power over Ethernet from one unit, the ISW-514PS series can reduce cables deployment and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire that carries both data and power lowers the installation costs, simplifies the installation effort and eliminates the need for electricians or extension cords. Furthermore, as there is only 24V DC input in some industrial environments, the ISW-514PS series supports 24V DC or 48V DC dual voltages input and is able to provide more wide-ranging industrial IEEE 802.3af PoE applications.

    Fiber Optic Link Capability for Flexible Distance Extension

    The ISW-514PS series is equipped with one 100Base-FX port that provides more flexibility for Transportation, Manufacturing, Security and Surveillance on distance extension without any limitation. The ISW-514PS series offers high performance switch architecture as shown below:
     • ISW-514PS comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 2km)
     • ISW-514PS15 comes with 4 10/100Mbps UTP ports and 1 100FX (SC interface within 15km)
     • ISW-514PSF comes with 4 10/100Mbps UTP ports and 1 100FX (LC interface within optional of Single / multi-mode SFP module)

    Excellent Web Smart Features

    For efficient management, the ISW-514PS series is built with Web-based management design to offer a user-friendly configuration interface. It makes the ISW-514PS series easy to survey and control the PoE power provision to the devices via the Web interface. The ISW-514PS series features Web Smart functions including 802.1Q VLAN, bandwidth control, QoS, PoE Configuration, Port Management, Alert Trap Configuration and more. These features provide a cost-effective way to manage the network devices through the Internet whenever you are at work or at home.

    Environmentally Hardened Design

    With IP30 industrial case protection, the ISW-514PS series provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. The aluminum metal case helps cooling much faster and enables the Industrial PoE Switch to operate stably under the harsh temperature environment ranging from -10 to 60 degrees C. Therefore, the web management Industrial PoE Switch can be placed in almost any difficult environment. It also offers dual-redundant, reversible polarity 24V DC or 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.

     
  • Applications
  • Industrial Area Department / Workgroup PoE Switch

    Providing up to 4 PoE, in-line power interface, the ISW-514PS Industrial Switch series can easily build a power centrally-controlled IP phone system, IP surveillance system, and wireless AP group for the enterprise. For instance, 4 cameras / APs can be easily installed around the corner of the company for surveillance demands or building a wireless roaming environment in the office. Without the power-socket limitation, the ISW-514PS series makes the installation of IP cameras or WLAN AP easier and more efficient.

     
     
     
  • Key Features
  • Physical Port

    ISW-514PS
    • 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE injector
    • 1-port 100Base-FX multi-mode SC interface – 2km
    ISW-514PS15
    • 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE injector
    • 1-port 100Base-FX single mode SC interface – 15km
    ISW-514PSF
    • 4-port 10/100Base-TX RJ-45 with IEEE 802.3af PoE injector
    • 1-port 100Base-FX SFP interface

    IEEE 802.3af PoE

    • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
    • Up to 4 IEEE 802.3af devices powered
    • Supports PoE Power up to 15.4 watts for each PoE port
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100m

    PoE Management

    • Total PoE Power Budget Control
    • Enable / Disable PoE Function on each port
    • PoE port Power Feeding priority
    • Power limit on PoE port
    • PD Classification Detection

    Web Management

    • Web interface for remote management
    • Firmware upgrade through Web interface
    • PLANET Smart Discovery utility automatically finds PLANET devices on the network
    • SNMP Trap for alarm notification of events
    • VLAN and QoS configuration

    Layer 2 Features

    • Supports auto-negotiation and 10/100Mbps half / full duplex and auto MDI/MDI-X
    • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
    • Automatic address learning and address aging
    • Integrated address look-up engine, supports 1K absolute MAC addresses
    • CSMA/CD Protocol

    Industrial Case / Installation

    • IP30 aluminum metal case protection
    • DIN rail and wall mount design
    • Redundant Power design
    • 24 or 48V DC, redundant power with polarity reverse protect function
    • Supports EFT protection 6000V DC for protection power line
    • Supports Ethernet ESD 6000V DC protection
    • -10 to 60 degrees C operation temperature

     
  • Specifications
  • Hardware Specifications
    10/100Base-TX Ports 4
    100Base-FX Port 1
    Fiber Port Type ISW-514PS:Multi-Mode
    ISW-514PS15:Single Mode
    ISW-514PSF:Vary on SFP
    Connector Type ISW-514PS:SC
    ISW-514PS15:SC
    ISW-514PSF:SFP
    Maximum Distance ISW-514PS:2km
    ISW-514PS15:15km
    ISW-514PSF:Vary on SFP
    Optical Frequency ISW-514PS:1300nm
    ISW-514PS15:1310nm
    ISW-514PSF:Vary on SFP
    Launch Power (dBm) ISW-514PS:Max.:-14   Min.:-20
    ISW-514PS15:Max.: 0   Min.: -20
    ISW-514PSF:Vary on SFP
    Receive Sensitivity (dBm) ISW-514PS:-32
    ISW-514PS15:-32
    ISW-514PSF:Vary on SFP
    IEEE 802.3af PoE Ports 4
    Dimensions (D x W x H) 135 x 87.8 x 56 mm
    Weight 871g
    Power LED Power1, Power2 and Fault
    Port 1~4: PoE in-use, LNK/ACT
    Port 5: LNK/ACT
    Power Requirements 24 or 48V DC, redundant power with polarity reverse protection function
    Enclosure IP-30 aluminum metal case
    Protection ESD (Ethernet): 6KV DC
    Surge (Power): 6KV DC
    Installation DIN rail kit and wall mount ear
    Alarm One relay output for power failure
    Alarm relay current carry ability: 1A @ DC 24V
    Power over Ethernet
    PoE Standard IEEE 802.3af Power over Ethernet / PSE
    PoE Power Supply Type End-Span
    PoE Power Output Per Port 48V DC, 350mA . max. 15.4 watts
    Power Pin Assignment 1/2(+), 3/6(-)
    Switch Specifications
    Switch Processing Scheme Store-and-Forward
    Switch Fabric 1Gbps
    Throughput (packet per second) 0.74Mpps@64bytes
    Address Table 1K entries
    Maximum Frame Size 1536 Bytes
    Pack Buffer 512k bits
    Flow Control Back pressure for half duplex
    IEEE 802.3x pause frame for full duplex
    Network cables • 10/100Base-TX:
     • 4-Pair UTP Cat. 3, 4, 5, 5e, 6 (100meters, max.)
     • EIA/TIA-568 100-ohm STP (100meters, max.)
    • 100Base-FX:
     • Multi-Mode optic fiber 62.5/125μm or 50/125μm
     • Single-Mode optic fiber 9/125μm
    Layer 2 Function
    Management Web management, SNMP Trap
    VLAN • Port-based VLAN
    • IEEE 802.1Q Tag-based VLAN, Up to 16 VLAN groups
    QoS 2 priority queues for three type of Class of Service
     • Port-based
     • IEEE 802.1p priority tag
     • TCP/IP header’s DSCP classifier
    Weighted Round Robin queue scheduling
    Bandwidth Control Inbound Rate Limit and Outbound Traffic shaping
    Storm Control Disable, 12.5%, 25%, 50%, 62.5% 4 levels
    Security Supports 5 IP addresses that have permission to access the Switch
    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Stability Testing IEC60068-2-32 (Free Fall)
    IEC60068-2-27 (Shock)
    IEC60068-2-6 (Vibration)
    Standard Compliance IEEE 802.3 Ethernet
    IEEE 802.3u Fast Ethernet
    IEEE 802.3x Flow Control
    IEEE 802.3af Power over Ethernet
    IEEE 802.1p Class of Service
    IEEE 802.1Q VLAN Tagging
    Environment
    Temperature Operating: -10~60 degrees C
    Storage: -40~85 degrees C
    Humidity Operating: 5~90%
    Storage: 5~90% (non-condensing)
  • Downloads

  • Datasheet

    Date Version Description Download
    2015-06-05 1.0 ISW-514PS / ISW-514PS15 / ISW-514PSF


    Firmware

    Date Version Description Download
    2015-05-15 1.3b150504 Release for ISW-514PSF, Bug Fixed –
    1.Backup file loading failed
    2.Auto Logout
    3.SNMP Trap issue

    2014-05-23 1.1b120131 Bug Fixed – Fixed VLAN CPU port issue. (for ISW-514PSF)
    2014-05-23 1.1b120131 Bug Fixed – Fixed VLAN CPU port issue. (for ISW-514PS / ISW-514PS15)


    Quick Guide

    Date Version Description Download
    2011-07-15 1.0 Quick Install Guide


    User’s Manual

    Date Version Description Download
    2011-07-15 1.0 User’s Manual


    EC Declaration

    Date Version Description Download
    2011-07-15 1.0 Initial Release