Call us: +61 2 9838 8899
FAX: +61 2 9838 8818

WGSW-28040P / WGSW-28040P4

WGSW-28040P / WGSW-28040P4

24-Port 10/100/1000Mbps PoE + 4-Port Gigabit TP/SFP Combo Managed Switch 

1icon_IPv6-Management2icon_802.1Q_VLAN0icon_mstp2icon_1GMP_Snoopingicon_snmp5icon_802_3af_end

  • Overview
  • Incredibly Perfect 24-Port PoE Gigabit Switch for SMB Network
    PLANET introduces the latest cost-effective Managed PoE Gigabit Switch, WGSW-28040P Series, which is perfectly designed for SMB and SOHO PoE network infrastructures. The WGSW-28040P Series is a 28-port Gigabit Ethernet switch providing 802.3af Power over Ethernet on its first 24 Gigabit ports and 4 extra Gigabit TP/SFP combo uplink interfaces for connecting the PoE Switch to core network. Besides the user-friendly but advanced IPv6 / IPv4 management interfaces and abundant L2 / L4 switching functions, the WGSW-28040P Series applies the Green technology to provide energy saving, high speed and reliable office network environment. The WGSW-28040P Series is quite suitable for next generation network deployment and offers the lowest total cost of ownership. It is the best investment for business expansion or upgrading its network infrastructure.

    High Performance
    The WGSW-28040 Series provides 28 Gigabit Ethernet ports of which 4 shared Gigabit SFP slots are included. It boasts high performance switch architecture that is capable of providing the non-blocking switch fabric and wire-speed throughput as high as 56Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.

     
     
    Easy Cabling Installation by Power over Ethernet
    The PoE in-line power following the standard IEEE 802.3af makes the WGSW-28040P Series able to power on 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. With data and power over Ethernet from one unit, it can easily build a power centrally-controlled IP phone system, IP camera system, or Wireless AP group for the enterprises. Adopting the PoE technology for a wire carrying both data and power, the WGSW-28040P Series reduces cable deployment and the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Therefore, the WGSW-28040P Series helps the SMBs lower the installation costs, simplify the installation effort and eliminate the need of electricians or extension cords.

    IPv6 / IPv4 Dual Stack
    By supporting IPv6 management features and also backward compatible with IPv4, the WGSW-28040 Series helps the SMBs to step in the IPv6 era with the lowest investment but does not need to replace the network facilities while the ISP constructs the IPv6 FTTx edge network.

    Robust Layer 2 Features
    The WGSW-28040 Series can be programmed for advanced switch management functions such as dynamic Port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), Loop and BPDU Guard, and IGMP Snooping. Via aggregation of supporting ports, the WGSW-28040 Series allows the operation of a high-speed trunk combining multiple ports as a 16Gbps fat pipe and supports fail-over as well.

    Efficient Traffic Control
    The WGSW-28040 Series is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance at VoIP and video stream transmission and empowers the enterprises to take full advantages of the limited network resources.

    Enhanced and Secure Management
    For efficient management, the WGSW-28040 Series is equipped with console, WEB, telnet and SNMP management interfaces. With the built-in Web-based management interface, the WGSW-28040 Series offers an easy-to-use, platform-independent management and configuration facility. By supporting standard Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet and the console port. Moreover, the WGSW-28040 Series offers secure remote management by supporting SSH and SSL connection which encrypt the packet content at each session.

     
     
    Powerful Security for User Management
    PLANET WGSW-28040 Series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-Based authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Port Security allows limiting the number of users on a given port. The network administrators can now construct highly secured corporate networks with considerably less time and effort than before.

    Flexible Network Extension Solution
    The four mini-GBIC slots built in the WGSW-28040 Series are compatible with 100/1000Base-SX/LX and WDM SFP (Small Form Factor Pluggable) fiber-optic modules. The transmission distance can be extended from 550 meters (Multi-Mode fiber) up to above 10/20/30/40/50/70/120 kilometers (Single-Mode fiber or WDM fiber). It is well suited for applications in the enterprise data centers and distributions.

     
  • Applications
  • PoE IP Telephony Office
    With the business office expansion, the additional telephones required could be installed in less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET WGSW-28040P Series PoE Managed Switch helps SMBs to create an integrated data, voice, and powered network. The 802.3af compliant IP Phones can be installed without the need of additional power cables because the power can be provided via the standard Ethernet cable from the WGSW-28040P Series. The WGSW-28040P Series work perfectly with PoE IP Phones and Analog Telephony Adapters and its IP DSCP priority of QoS feature improves the voice communication quality. With the WGSW-28040P Series, IP Telephony deployment becomes more reliable and cost effective, which helps SMBs save tremendous cost when upgrading from the traditional telephony to IP Telephony communications infrastructure.
     
     
    Department / Workgroup PoE Switch
    Providing up to 24-Port PoE, in-line power interface, the WGSW-28040P Series Managed PoE Switch can easily build a power centrally-controlled IP phone system, IP camera system, or Wireless AP group for the enterprises. For instance, IP cameras or Wireless APs can be easily installed for surveillance or wireless roaming demands in the office. Without the power-socket limitation, the PoE Switch makes the installation of cameras or Wireless LAN AP more easily and efficiently.
     
     
  • Key Features
  • Physical Port
      •28-Port 10/100/1000Base-T Gigabit RJ-45 copper with 24-Port IEEE 802.3af PoE Injector
      •4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-25 to Port-28
      •RS-232 DB9 console interface for Switch basic management and setup

    Layer 2 Features
      • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control
       (Full-Duplex)
      • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous
    packets to optimize the network bandwidth
      • Supports VLAN
       –Management VLAN
       –IEEE 802.1Q Tagged VLAN
       –Up to 256 VLANs groups, out of 4094 VLAN IDs
       –Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
       –Private VLAN Edge (PVE / Port Isolation)
       –IP Subnet VLAN
       –Voice VLAN
      • Supports Spanning Tree Protocol
       –STP, IEEE 802.1D (Spanning Tree Protocol)
       –RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
       –MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
       –BPDU Guard
      • Supports Link Aggregation
       –IEEE 802.3ad Link Aggregation Control Protocol (LACP)
       –Cisco ether-channel (Static Trunk)
       –Maximum 8 trunk groups, up to 8 ports per trunk group
       –Up to 16Gbps bandwidth (Duplex Mode)
      • Provides Port Mirror (many-to-1)
      • Port Mirroring to monitor the incoming or outgoing traffic on a particular port

    Power over Ethernet
      • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
      • Up to 24 ports for IEEE 802.3af devices powered
      • Supports PoE Power up to 15.4 watts for each PoE ports
      • Auto detect powered device (PD)
      • Circuit protection prevents power interference between ports
      • Remote power feeding up to 100m
      • PoE Management
      • Per port PoE function enable / disable
      • PoE schedule
      • PD alive check

    Quality of Service
      • Ingress / Egress Rate Limit per port bandwidth control
      • 8 priority queues on all switch ports
      • Traffic classification
       –Port-Based priority
       –IEEE 802.1p CoS
       –IP DSCP of IPv4 / IPv6 packets
      • Strict priority and Weighted Round Robin (WRR) CoS policies
      • DSCP remarking

    Multicast
      • Supports IGMP Snooping v1, v2 and v3
      • Querier mode support
      • IGMP Snooping v2 fast leave
      • Unknown Multicast drop

    Security
      • Storm Control support
       –Broadcast / Multicast / Unknown-Unicast / Unknown-Multicast
      • Authentication
       –IEEE 802.1x Port-Based network access authentication
       –Built-in RADIUS client to co-operate with the RADIUS servers
      • Access Control List
       –IP-Based ACL
       –MAC-Based ACL
      • MAC Security
       –Static MAC
       –Source / Destination MAC Filtering
       –Port Security for Source MAC address entries filtering
      • DHCP Snooping to filter un-trusted DHCP message
      • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
      • IP Source Guard prevent IP spoofing attacks

    Management
      • IPv6 / IPv4 Dual Stack
      • Switch Management Interfaces
       –Console / Telnet Command Line Interface
       –IPv4 and IPv6 Web switch management
       –SNMP v1, v2c & v3 switch management
       –SSH / SSL secure access
      • Four RMON groups (history, statistics, alarms, and events)
      • SNMP trap for interface Link Up and Link Down notification
      • SNTP (Simple Network Time Protocol)
      • Built-in Trivial File Transfer Protocol (TFTP) client
      • BOOTP and DHCP for IP address assignment
      • Firmware upload/download via HTTP / TFTP
      • DHCP Relay
      • DHCP Option 82
      • Link Layer Discovery Protocol (LLDP) Protocol
      • Event message logging to remote Syslog server
      • Reset button for system reboot or reset to factory default
      • IP Stacking management up to 16 units

     
  • Specifications
  • Hardware Specification
    Hardware Version Version 2
    Copper Ports 28 10/100/1000Base-T RJ-45 Auto-MDI / MDI-X ports
    SFP/mini-GBIC Slots 4 SFP interfaces, shared with Port-25 to Port-28, compatible with 100Base-FX
    Switch Processing Scheme Store-and-Forward
    Switch Fabric 56Gbps / non-blocking
    Throughput @ 64Kbytes 41.67Mpps
    MAC Address Table 16K entries
    Share Data Buffer 448K bytes
    Flow Control IEEE 802.3x Pause Frame for Full-Duplex

    Back pressure for Half-Duplex

    Jumbo Frame 9216 Bytes
    LED PWR, SYS, LNK / ACT, PoE In-Use, 1000, PWR Alert, FAN 1 & 2 Alert
    Dimension (W x D x H) 440 x 300 x 44.5 mm, 1U height
    Weight WGSW-28040P: 3.9kg

    WGSW-28040P4: 4.3kg

    Power Consumption WGSW-28040P

    Max. 202 Watts / 688.82 BTU

    WGSW-28040P4

    Max. 398 Watts / 1357.18 BTU

    Power Requirement AC 100~240V, 50/60Hz
    ESD Protection 6KV DC
    Power over Ethernet
    PoE Standard IEEE 802.3af PoE / PSE
    PoE Power Supply Type End-Span
    PoE Power Output Per Port 48V DC

    Max. 15.4 Watts

    Power Pin Assignment 1/2(+), 3/6(-)
    PoE Power Budget WGSW-28040P: 180 Watts

    WGSW-28040P4: 380 Watts

    PoE Ability Number of PD @ 7Watts

    WGSW-28040P: 24

    WGSW-28040P4: 24

    Number of PD @ 15.4Watts

    WGSW-28040P: 11

    WGSW-28040P4: 24

    Layer 2 Function
    Basic Management Interfaces Console, Telnet, Web Browser, SNMPv1, v2c
    Security Management Interfaces SSH, SSL, SNMPv3
    Port Configuration Port disable / enable

    Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection

    Flow Control disable / enable

    Port Description

    Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, and trunk status
    VLAN 802.1Q Tagged Based VLAN

    Q-in-Q

    Private VLAN Edge (PVE)

    IP Subnet VLAN

    Voice VLAN

    Up to 256 VLAN groups, out of 4094 VLAN IDs

    Link Aggregation IEEE 802.3ad LACP / Static Trunk

    8 groups of 8-Port trunk support

    QoS 8-Level priority queue for switching

    Traffic classification based, Strict priority and WRR

    ■ 802.1p priority

    ■ IP DSCP field

    IGMP Snooping IGMP (v1 / v2 / v3) Snooping, up to 255 multicast Groups

    IGMP Querier mode support

    Access Control List IP-Based ACL / MAC-Based ACL

    Up to 256 entries

    SNMP MIBs RFC 1213 MIB-II

    IF-MIB

    RFC 1493 Bridge MIB

    RFC 1643 Ethernet MIB

    RFC 2863 Interface MIB

    RFC 2665 Ether-Like MIB

    RFC 2819 RMON MIB (Group 1)

    RFC 2737 Entity MIB

    RFC 3411 SNMP-MIB

    Standards Conformance
    Regulation Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10Base-T

    IEEE 802.3u 100Base-TX

    IEEE 802.3z 1000Base-SX/LX

    IEEE 802.3ab Gigabit 1000Base-T

    IEEE 802.3x Flow Control

    IEEE 802.3ad Port trunk with LACP

    IEEE 802.1D Spanning tree protocol

    IEEE 802.1w Rapid spanning tree protocol

    IEEE 802.1s Multiple spanning tree protocol

    IEEE 802.1p Class of service

    IEEE 802.1Q VLAN Tagging

    IEEE 802.1x Port Authentication Network Control

    IEEE 802.3af Power over Ethernet

    Environment
    Operating Temperature: 0 ~ 50 Degree C

    Relative Humidity: 20 ~ 95% (non-condensing)

    Storage Temperature: -10 ~ 70 Degree C

    Relative Humidity: 20 ~ 95% (non-condensing)

  • Downloads

  • Datasheet

    Date Version Description Download
    2012-03-23 1.0 WGSW-28040P


    Firmware

    Date Version Description Download
    2012-04-27 1.0b120302 Hardware version: 1.x & 2.x.
    Function Added-
    (1) Add IP subnet-based VLAN, voice VLAN & guest VLAN (2) Add DHCP snooping, ARP inspection & IP source guard function.


    Quick Guide

    Date Version Description Download
    2012-03-23 1.1 Add WGSW-28040P4.
    2012-03-23 1.0 Initial Release.


    User’s Manual

    Date Version Description Download
    2012-03-23 1.3 Add WGSW-28040P4.
    2012-03-23 1.2 Initial Release.


    EC Declaration

    Date Version Description Download
    2014-11-03 1.0 EC Declaration
    Ordering Information
    WGSW-28040P 24-Port 10/100/1000Mbps PoE + 4-Port Gigabit TP/SFP Combo Managed Switch / 180W PoE budget
    WGSW-28040P4 24-Port 10/100/1000Mbps PoE + 4-Port Gigabit TP/SFP Combo Managed Switch / 380W PoE budget