LRP-422CST
Industrial 4-port Coax + 2-port 10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over Coaxial Managed Switch
PLANET Long Reach PoE Solution enables all enterprises and network service providers to set up an IP infrastructure in a remote location where 802.3af/at PoE compliant powered devices can receive both data and power via PLANET switches, and PLANET LRP extenders and injectors over a long distance but not limited to the normal 100 meters.
Intelligent Long Reach PoE Switch on Coaxial-based Network |
Environmentally Hardened Design With IP30 aluminum industrial case protection, the LRP-422CST provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. It also possesses an integrated power supply source with wide range of voltages (48 to 56V DC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -40 to 75 degrees C, the LRP-422CST can be placed in almost any difficult environment. Multi-channel Long Reach Power over Ethernet |
Centralized Power Management With the centrally-managed 150-watt PoE budget, the LRP-422CST eliminates the need for an additional remote site power while allowing a single power source to provide power to both LRP extenders and the PoE powered devices at long range. The Long Reach PoE capabilities provided help to reduce installation time and deployment costs for network devices as a result of freeing from restrictions of power outlet locations. Daisy-chaining Multiple Nodes |
Built-in Unique PoE Functions for Powered Devices Management As a managed PoE switch for surveillance, wireless and VoIP networks, the LRP-422CST particularly features the following special PoE Management functions to accomplish a highly-efficient Long Reach network: ■ PD Alive Check Intelligent Powered Device Alive Check |
Scheduled Power Recycling The LRP-422CST allows each of the connected PoE IP cameras or PoE wireless access points via the LRP-101CE Long Reach PoE Extender to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or wireless AP crash resulting from buffer overflow. |
PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the LRP-422CST can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours. |
PoE Usage Monitoring Via the power usage chart in the web management interface, the LRP-422CST enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. IPv6/IPv4 Dual Stack Robust Layer 2 Features |
Efficient Traffic Control The LRP-422CST is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. It guarantees the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security Advanced Network Security Friendly and Secure Management |
Flexibility and Long-distance Extension Solution The LRP-422CST provides two Gigabit TP interfaces supporting 10/100/1000BASE-T RJ45 copper to be connected with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through another two dual-speed fiber SFP slots, it can connect with the 100BASE-FX/1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). The LRP-422CST is well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism |
Directly Upgrade Analog CCTV System to IP-based Security Solution Under current CCTV system, if you need more channels and higher resolution in longer distance but the CCTV system cannot fulfill your demands, you can use the LRP-422CST via the existing coaxial cable by working with the LRP-101CE Long Reach PoE Extender to instantly establish PoE IP camera infrastructure and to easily upgrade IP camera infrastructure to up to 1024 channels in the future. |
Long Reach PoE IP Surveillance Solution The LRP-422CST provides robust Long Reach PoE features to prevent network interruptions and extend the transmission of data and power via coaxial cable for up to 1km by working with the LRP-101CE Long Reach PoE Extender. It incorporates PLANET’s new Long Reach PoE technology into customer’s IP surveillance network to increase the distance of system transmission but to decrease the cost of installation. Applying the Long Reach Power over Ethernet functions in the LRP-422CST, the LRP-101CE can directly connect with any IEEE 802.3at/af end-nodes like IP cameras. Furthermore, the power management of the IP camera system can be centrally controlled by the LRP-422CST. |
Physical Port
Long Reach Power over Ethernet
Industrial Case/Installation
Layer 2 Features
Quality of Service
Multicast
Security
Management
|
Hardware Specifications | |||||||||||||||||||||||||||||||
Ethernet Interfaces | ■ Copper • 2 x 10/100/1000BASE-T RJ45 • Auto-negotiation/Auto-MDI/MDI-X ■ Fiber Optic ■ Jumbo Frame |
||||||||||||||||||||||||||||||
Long Reach PoE Interfaces | ■ Connectivity • 4 x BNC female connectors • Long Reach PoE over coaxial PSE (Power Source Equipment) – BNC center pole : DC+/Hi – BNC shield : DC -/Lo ■ Power Output ■ Total Power Budget ■ Cabling ■ Maximum Distance ■ Long Reach Ethernet Standard ■ Modulation Type ■ Security ■ Frequency Band ■ Performance
* The actual data rate and PoE output vary on the quality of the copper wire and environmental factors.The performance result above is based on the testing via the RG-6/U coaxial cable. ** TX: The LRP-422CST to the LRP-101CE ■ Multiple Nodes * The actual extender nodes vary on the quality of the copper wire and environmental factors. ■ LRP Compatibility |
||||||||||||||||||||||||||||||
Console | 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) | ||||||||||||||||||||||||||||||
Switch Architecture | Store-and-Forward | ||||||||||||||||||||||||||||||
Switch Fabric | 8.8Gbps/non-blocking | ||||||||||||||||||||||||||||||
Address Table | 8K entries | ||||||||||||||||||||||||||||||
Shared Data Buffer | 4.1 megabits | ||||||||||||||||||||||||||||||
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
||||||||||||||||||||||||||||||
Reset Button | < 5 sec: System reboot > 5 sec: Factory default | ||||||||||||||||||||||||||||||
EST Protection | 6KV DC | ||||||||||||||||||||||||||||||
ESD Protection | 6KV DC | ||||||||||||||||||||||||||||||
Enclosure | IP30 aluminum case | ||||||||||||||||||||||||||||||
Installation | DIN-rail kit and wall-mount kit | ||||||||||||||||||||||||||||||
Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
||||||||||||||||||||||||||||||
Alarm | One relay output for power failure. Alarm Relay current carry ability: 1A @ 24V AC | ||||||||||||||||||||||||||||||
LED | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Per LRP Port: LNK/ACT (Green) PoE In-use (Orange) Per Gigabit Port: LNK/ACT (Green) 1000(Orange) |
||||||||||||||||||||||||||||||
Dimensions (W x D x H) | 107 x 72 x 152 mm | ||||||||||||||||||||||||||||||
Weight | 1,150g | ||||||||||||||||||||||||||||||
Power Requirements | 48 to 56V DC | ||||||||||||||||||||||||||||||
Power Consumption | 9.5 watts/32.42 BTU (System on) 156 watts/532.30 BTU (Full loading) |
||||||||||||||||||||||||||||||
Layer 2 Functions | |||||||||||||||||||||||||||||||
Port Mirroring | TX/RX/both Many-to-1 monitor |
||||||||||||||||||||||||||||||
VLAN | 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP |
||||||||||||||||||||||||||||||
Link Aggregation | IEEE 802.3ad LACP and static trunk Supports 4 trunk groups with 4 ports for each group |
||||||||||||||||||||||||||||||
Spanning Tree Protocol | STP/RSTP/MSTP | ||||||||||||||||||||||||||||||
IGMP Snooping | IGMP (v2/v3) Snooping IGMP Querier Up to 256 multicast groups |
||||||||||||||||||||||||||||||
MLD Snooping | MLD (v1/v2) Snooping, up to 256 multicast groups | ||||||||||||||||||||||||||||||
Access Control List | IPv4/IPv6 IP-based ACL / MAC-based ACL | ||||||||||||||||||||||||||||||
QoS | 8 mapping IDs to 8 level priority queues – Port number – 802.1p priority – 802.1Q VLAN tag – DSCP field in IP packet Traffic classification based, strict priority and WRR |
||||||||||||||||||||||||||||||
Security | IEEE 802.1X port-based authentication Built-in RADIUS client to co-operate with RADIUS server RADIUS/TACACS+ user access authentication IP-MAC port binding MAC filter Static MAC address DHCP Snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard |
||||||||||||||||||||||||||||||
Management Functions | |||||||||||||||||||||||||||||||
Basic Management Interfaces | Web browser/Telnet/SNMP v1, v2c Firmware upgrade by HTTP/TFTP protocol through Ethernet network Remote/Local Syslog System log LLDP protocol SNTP |
||||||||||||||||||||||||||||||
Secure Management Interfaces | SSH, SSL, SNMP v3 | ||||||||||||||||||||||||||||||
SNMP MIBs | RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB RFC 2674 Bridge MIB Extensions RFC 2737 Entity MIB (Version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB |
||||||||||||||||||||||||||||||
Standards Conformance | |||||||||||||||||||||||||||||||
Regulation Compliance | FCC Part 15 Class A, CE | ||||||||||||||||||||||||||||||
Standards Compliance | IEEE 1901 Broadband Power Line IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 |
||||||||||||||||||||||||||||||
Environment | |||||||||||||||||||||||||||||||
Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
||||||||||||||||||||||||||||||
Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
|
Ordering Information | |
LRP-422CST | Industrial 4-port Coax + 2-port 10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over Coaxial Managed Switch |